Ferrous & Non-ferrous Alloy

Share us

92.3 - 92.5 HRA Tungsten Carbide Rod Blanks with 0.4 μm Ultrafine TC Grain Size

AIA-1

Description

92.3 - 92.5 HRA Tungsten Carbide Rod Blanks with 0.4 μm Ultrafine TC Grain Size
?
?
Description:?
?

Cemented carbide essentially consists of two main components: hard metal tungsten carbide (WC) and binding agent Co. Carbide contributes to high hardness property in a most important degree for hard metal WC, while cobalt maintains its relative high toughness at the high level of hardness. With Hot Isostatic Pressing sintering technique, cemented carbide material is fully consolidated by simultaneous application of heat and pressure, producing a close-to-full-density state. Consequently, the technique greatly optimizes rod’s quality, being more stable and reliable.?
?

?

Specification:

?


?

Solid?rods-?cut?to?length(Metric):

?

- - - -
D | L | D | L | D | L |
(mm) | Tol. (+1.5mm) | (mm) | Tol. (+1.5mm) | (mm) | Tol. (+1.5mm) |
2.0 | 32 | 8.0 | 44 | 12.0 | 84 |
3.0 | 32 | 8.0 | 56 | 12.0 | 101 |
3.0 | 38 | 8.0 | 59 | 12.0 | 151 |
3.0 | 39 | 8.0 | 62 | 14.0 | 59 |
3.0 | 47 | 8.0 | 64 | 14.0 | 76 |
3.0 | 52 | 8.0 | 76 | 14.0 | 84 |
3.0 | 76 | 8.0 | 101 | 14.0 | 151 |
4.0 | 32 | 9.0 | 62 | 16.0 | 63 |
4.0 | 40 | 9.0 | 69 | 16.0 | 75 |
4.0 | 51 | 10.0 | 49 | 16.0 | 77 |
4.0 | 59 | 10.0 | 51 | 16.0 | 83 |
4.0 | 63 | 10.0 | 56 | 16.0 | 93 |
4.0 | 67 | 10.0 | 67 | 16.0 | 151 |
4.0 | 76 | 10.0 | 71 | 18.0 | 85 |
5.0 | 51 | 10.0 | 73 | 18.0 | 93 |
6.0 | 37 | 10.0 | 77 | 18.0 | 101 |
6.0 | 39 | 10.0 | 101 | 18.0 | 151 |
6.0 | 40 | 11.0 | 72 | 20.0 | 76 |
6.0 | 46 | 11.0 | 85 | 20.0 | 93 |
6.0 | 51 | 12.0 | 56 | 20.0 | 100 |
6.0 | 55 | 12.0 | 70 | 20.0 | 102 |
6.0 | 58 | 12.0 | 72 | 20.0 | 105 |
6.0 | 76 | 12.0 | 74 | 20.0 | 151 |
- - - -

?

?

Areas?of?Application:

?

We would be glad to advise you when choosing the grades to suit optimally your requirements.?
Following are applications that our HF25(K40-K50) fits for cutting.?

?

1.?Corrosion?and?heat?resistant?steel

2.?Stainless?steel

3.?Non?ferrous?metals

4.?Titanium?alloys

?

?

Advantage:
?

Cemented carbide consists of natural hard and stable phase, and practically doesn’t lose any level of its high hardness when heating up. Therefore, high speed steel cannot substitute tungsten carbide, as the high hardness of HSS is only in a result of quenching process during which hard phase nucleates & grows and it breaks down when annealing.?
? ??
Quality can be taken for granted, as we produce tungsten powder, tungsten carbide powder, and material’s quality is for sure guaranteed. About our powder, 11 years are accumulated to be professional, winning high reputation within China, which indicates every pre-process for making solid rods is clearly monitored. Consequently, the quality of solid TC rods is guaranteed to be high and stable.
?

cheap prodocuts, china suppliers,

Read More

Previous

K30 - K40 Tungsten Carbide Bar with 92 - 92.3 HRA , CO 10% Tungsten carbide stock...

Jiangsu Hetian Technological Material Co., Ltd.

Tungsten Carbide Rod

Address: No.295, Qianluo Village, Dingshu Town, Yixing City, Jiangsu Province, China,
Wuxi, Jiangsu
China, 214000

Tel: 86-510-87490565
Fax: 86-510-87490565

H5响应式定制设计
26种语言,SEO营销型网站


H5/响应式/营销型企业网站; 26种语言扩展;
覆盖: 英文、法语、德语、西班牙语、葡萄牙语、俄语、阿拉伯语、波斯语、日语、韩语
了解更多