Wire Mesh

1. Home
2. Products
3. Minerals & Metallurgy
4. Wire Mesh

Share us

K30 - K40 Tungsten Carbide Bar with 92 - 92.3 HRA , CO 10% Tungsten carbide stock

AIA-1

Send Inquiry

Description

K30 - K40 Tungsten Carbide Rod Blanks with 92 - 92.3 HRA, CO 10% Fixed length Bar

?

?

Description:?

?

Tungsten carbide rod can offer best-fit solutions for special work piece metals such as harden material with high wear resistance. Tungsten carbide rod is a WC-Co alloy, Co content 10%, made up by 0.6μm sub-micron grain through Sinter-HIP technology, which is simultaneous application of heat and pressure fully consolidates the carbide during the sintering process. We adopt automatical temperature control system and advanced sintering technology to reduce the probability of porosities, which efficient increase the mechanical property of rod blank. Our Carbide rods product quality is stable and reliable, which have a good shock resistance, abrasion resistant and bending resistance in use.?

?

?

Specifications:

?

?

?

Solid?rods-?cut?to?length?(inch):

?

- - - -
D | L | D | L |
?(inch) | (mm) | (inch) | Tol (+1.5 mm) | (inch) | (mm) | (inch) | Tol (+1.5 mm) |
3/16 | 0.188 | 4.763 | 1 1/2 | 1.5 | 38.1 | 3/8 | 0.375 | 9.525 | 2 | 2 | 50.8 |
3/16 | 0.188 | 4.763 | 2 | 2 | 50.8 | 3/8 | 0.375 | 9.525 | 2 1/2 | 2.5 | 63.5 |
3/16 | 0.188 | 4.763 | 2 1/2 | 2.5 | 63.5 | 3/8 | 0.375 | 9.525 | 3 | 3 | 76.2 |
3/16 | 0.188 | 4.763 | 3 | 3 | 76.2 | 3/8 | 0.375 | 9.525 | 3 1/2 | 3.5 | 88.9 |
3/16 | 0.188 | 4.763 | 4 | 4 | 101.6 | 3/8 | 0.375 | 9.525 | 4 | 4 | 101.6 |
1/4 | 0.250 | 6.350 | 1 1/2 | 1.5 | 38.1 | 3/8 | 0.375 | 9.525 | 6 | 6 | 152.4 |
1/4 | 0.250 | 6.350 | 2 | 2 | 50.8 | 1/2 | 0.500 | 12.700 | 2 1/2 | 2.5 | 63.5 |
1/4 | 0.250 | 6.350 | 2 1/2 | 2.5 | 63.5 | 1/2 | 0.500 | 12.700 | 3 | 3 | 76.2 |
1/4 | 0.250 | 6.350 | 3 | 3 | 76.2 | 1/2 | 0.500 | 12.700 | 3 1/2 | 3.5 | 88.9 |
1/4 | 0.250 | 6.350 | 4 | 4 | 101.6 | 1/2 | 0.500 | 12.700 | 4 | 4 | 101.6 |
1/4 | 0.250 | 6.350 | 6 | 6 | 152.4 | 1/2 | 0.500 | 12.700 | 5 | 5 | 127 |
5/16 | 0.313 | 7.938 | 2 | 2 | 50.8 | 3/4 | 0.750 | 19.050 | 3 | 3 | 76.2 |
5/16 | 0.313 | 7.938 | 2 1/2 | 2.5 | 63.5 | 3/4 | 0.750 | 19.050 | 4 | 4 | 101.6 |
5/16 | 0.313 | 7.938 | 3 | 3 | 76.2 | 3/4 | 0.750 | 19.050 | 5 | 5 | 127 |
5/16 | 0.313 | 7.938 | 4 | 4 | 101.6 | 3/4 | 0.750 | 19.050 | 5 1/4 | 5.25 | 133.4 |
5/16 | 0.313 | 7.938 | 6 | 6 | 152.4 | 3/4 | 0.750 | 19.050 | 6 | 6 | 152.4 |
- - - -
?
?

Areas?of?Application:

?

We would be glad to advise you when choosing the grades to suit optimally your requirements. Following are applications that our HF30(K30 - K40)fits for cutting.?

?

1.?Corrosion?and?heat?resistant?steel

2.?Stainless?steel

3.?Non?ferrous?metals

4.?Plastics

?

?

Advantage:

?

Our products range from tungsten powder, tungsten carbide powder to cemented carbide rod. About our powder, 11 years are accumulated to be professional, winning high reputation within China, which indicates every pre-process for making solid rods is clearly monitored. Consequently, the quality of solid TC rods is guaranteed to be high and stable.?

?

Read More