Power Distribution Equipment
Description
MEGATRO can design and produce every type of dead-end and angel tower, which mainly used in power transmission line project. Dead-end and angle tower is used when the overhead power line terminates and directions changed, and is connected to substation equipment, or transitions to underground cable. They are used in high voltage AC and DC systems as well as railway traction, and come in a wide variety of shapes and sizes.
Transmission Tower structures can be classified by the way in which they support the line conductors. Dead-end and angle tower supports the full weight of the conductor and also all the tension in it, and also use strain insulators. Where the power transmission line must change direction, then angle towers are used. Structures are classified as angle suspension, angle strain, and angle dead-end.
MEGATRO fabricates every structure dead-end and angle tower by solid steel legs and angle iron cross members & pipes. Structures can reach heights up to 200 meter. MEGATRO is one of the few manufactures who assemble a face of every tower section. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies.
After fabrication all dead-end and angle tower are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers.
MEGATRO& acute;s termination tower systems can accommodate a variety of cross-arm. MEGATRO also offers a wide variety of accessories and mounts.
Availability size: Based on the customer& acute;s requirements.
Material: Chinese material or as per clients requirement
Package: Both parties discuss before delivery
Terms of Payment: L/C, T/T
Minimum Order Quantity: 1ton
Read More
Qingdao Megatro Mechanical and Electrical Equipment Co., Ltd.
power transmission tower, telecom tower, wind turbine, wind tower and mast, lamp post, high mast pole, steel house, steel building, wind power flange, steel stucture
Address: 288, Zhuhai Road, Huangdao district, Qingdao city, Shandong Province, China ,
qingdao, Shandong
China, 266400
Tel: 86-532-55588298
Fax: 86-532-55588276
