Power Distribution Equipment
Description
500KV guyed-V suspension tower
In an electric power transmission line, a suspension tower is where the conductors are simply suspended from the tower, the mechanical tension being the same on each side. In this case, the tower is supposed to carry a downward force, and a lateral force, but not a longitudinal force. Sometimes, in order to withstand the strong loading or wind speed, we need design guyed delta structure. Guyed towers are utilized to achieve the maximum in elevation and loading at an economical cost. The addition of heavier braced sections and torque arm guy points allow a tower to be engineered custom to its loading specifications. Guyed tower can withstand high tension or wind loading during power transmission lines.
MEGATRO provide Series 500KV guyed-V suspension tower at a much lower material cost than self supporting towers due to the efficient use of steel guy lines, The guyed lattice masts are normally guyed in three directions equally spaced 120 degrees apart over an anchor radius of typically 2/3 of the tower height, The mast construction consists of triangular lattice modular section, each module fully welded tubular leg and solid round bar bracing incorporating integral step rungs fabricated into the lattice framework on one face this removes the need for a separate ladder. all masts sections are hot dipped galvanized after fabrication. Mast heights range 9 up to 50 meters, these masts can also be Etched primed and powder coated as an optional extra if required
Read More
Qingdao Megatro Mechanical and Electrical Equipment Co., Ltd.
power transmission tower, telecom tower, wind turbine, wind tower and mast, lamp post, high mast pole, steel house, steel building, wind power flange, steel stucture
Address: 288, Zhuhai Road, Huangdao district, Qingdao city, Shandong Province, China ,
qingdao, Shandong
China, 266400
Tel: 86-532-55588298
Fax: 86-532-55588276
