Fischer Tropsch Wax Synthesis Wax FT Wax
Features: High melting point, High stability, Low Viscosity, Low oil content,Narrow Molecular weight Distribution, Fine crystal structure, Linear molecular structure, Low Viscosity, White color, Low penetrationApplications: In PVC processing as the lubricants, Hot melt adhesives, Master batches, Rubber industries, Pigment and coating, Polishes,Paints, PVC and rubber processing, Toners & Inks, Fertilizer release controller,Printing Ink, Bitumen modification
The Fischer-Tropsch Waxes are made from carbon monoxide and hydrogen in the presence of the selected catalyst. Generally, the feedstock is produced from coal or natural gas. The final synthetic waxes tend to be the saturated, straight-chain hydrocarbons. Their very linear molecular structure results in high melting points, low viscosity, and good hardness.
In PVC processing. Fischer-Tropsch synthetic wax is mainly used as an external lubricant. It has the relative molecular mass of 500-1000. Since, compared to PE wax, Fischer-Tropsch wax has a low molecular weight, low melt viscosity, high melting point, and narrow melting range, the same lubrication effect can be achieved with less dosage and reduce the negative impact of lubricant on the physical and mechanical properties of the PVC products. On adjustment of internal and external lubrication, it has the irreplaceable advantage than PE wax.
HSFT-105H has the fine crystal structure and narrow carbon distribution. Its low viscosity increases the production speed and fluidity of the PVC product. Besides, it can contribute to the dispersion of the pigment and other fillers. HSFT-105H can reduce the dosage by about 15%-50% compared to paraffin wax and PE wax.
In the processing and production of a masterbatch, HSFT-105H can effectively wet and penetrate into the pores of the agglomerated particles to coat the surface of the pigment, and better disperse the pigment aggregate under the action of the shearing force to effectively prevent re-agglomeration.
HSFT-105G take the place of Shell SX105 and Sasolwax H1
HSFT-105G has a higher melting point and the lower penetration. HSFT-105G is suitable to be used in road marking paints. Presently, the thermoplastic traffic marking paint is the most widely used on the roads as the autonomous vehicle guidance. It is generally composed of thermoplastic resin, pigments, and fillers. The addition of HSFT-105G can improve the dispersibility of pigment and filler in thermoplastic resin, and improve paint fluidity, prevent sedimentation, adjust viscosity, improved wear and stain resistance.
In PVC processing. Fischer-Tropsch synthetic wax is mainly used as an external lubricant. It has the relative molecular mass of 500-1000. Since, compared to PE wax, Fischer-Tropsch wax has a low molecular weight, low melt viscosity, high melting point, and narrow melting range, the same lubrication effect can be achieved with less dosage and reduce the negative impact of lubricant on the physical and mechanical properties of the PVC products. On adjustment of internal and external lubrication, it has the irreplaceable advantage than PE wax.
*Your email address will not be published. Required fields are marked.