Machinery & Equipment

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Machinery & Equipment

Share us

PH52 Small Floating Fish Feed Pellet Machine For Fish Farming 1.5mm 2.5mm

PH52

Send Inquiry

Description

?

?

PH52 Small Floating Fish Feed Pellet Machine For Fish Farming 1.5mm 2.5mm

?


1. Introduction of small extruder floating fish feed machines


This kind of machine can be making all kinds of fish feed, the pellets can be floating on water for 24hours.It can produce different shapes feed for fish, dog, cat etc. For fish, the feed can be floating or sinking. Through the pretreatment of the feed, it can reduce loss of nutrition and advance the protein ratio.
?
Descriptions of small extruder floating fish feed machines


The cutting structure is very advanced,the final length can be choose.In order to insure the quality and the capacity,there is the pressure-increased device.And the Electric heating device improve the feed expansion rate.The main bearing is from Japanese and Sweden SKF bearing.The floating pellets will float on the water for about 12 hours.It is very catering for fish.The pellets are non-pollution and easy for working members to observe.The raw meterial is experienced by the high temperature and high pressure,so it can kill the salmonellosis and bacterial infections.

Application scope of small extruder floating fish feed machines
Floating pellets are widely used in fish,omamental fish,fish farmers,small feed mill.
?
Characteristics of small extruder floating fish feed machines
New design,unique.simple struture,easy to install and easy to unload,friendly to operate

?

2.?Parameter?of?the?small?floating?fish?feed?pellet?machine?:

?

- - - -
model | capacity | power | the?grain-size | screw?diameter |
PH52 | 50-60kg/h | 5.5+0.75kw | 1.2-6mm | 52mm |
PH65 | 80-100kg/h | 11+0.75kw | 1.2-6mm | 65mm |
PH75 | 140-160kg/h | 15+0.75kw | 1.2-10mm | 75mm |
PH95 | 260-300kg/h | 22+0.75kw | 1.2-10mm | 95mm |
- - - -

?

?

3.?Working?principle?of?the?small?floating?fish?feed?pellet?machine:

?

There is no need to heat outside the machine, through the screw extruding of the raw?material, produces heat during the rotary working process, and gathers heat in the ?airtight environment to reach ripening, during the high temperature ripening process,?the starch and fiber of the raw material become swell, on the pressure-tight condition, spray up from the mold outlet through the high pressure produced by the regular rotating of the screw, after cutting by the forepart cutter which rotates regularly and high-speedily, the finished product will be shrunk and become small average ball. ?

?

Read More