Coatings

1. Home
2. Products
3. Chemicals
4. Coatings

Share us

BYTC15 Extra Fast Clear Coat.

6

Send Inquiry

Description

BOYET Series
Product Name/Model：BYTC15 Extra Fast Clear Coat.?

Characteristic: Extra fast drying clear coate, high gloss and hardness, easy application, low consumption and high efficiency to ensure good profit, suitable for fast spots repair.
Substrates 1K Basecoat.
Mixing Ratio Clear Coat? Hardener?? Thinner
2 1 0.1-0.3
＜25℃ BYTC15 Extra Fast?Drying Clear Coat BYTC150 Extra Fast?Dry Hardener BYTX-1 Fast Thinner
Spray?Viscosity 14-16s to drop off, in 4#?viscosity cup at 25°C,
Pot-Life At 25°C, 1.5 hour.
ReTreatment There are particles?or?runs after spray, sand affected area with P2000 sand paper
after thorough drying, then polish to solve the problem.
Spray Gun?Set Up Gravity Feed: 1.2-1.5mm 4-5kg/cm 2
Suction Feed: 1.4-1.6mm 4-5kg/cm 2
Spray?Technology Coats&Thickness: 2-3 coats, total 25-35um
Flash-Off Time: At 25°C,?5-10 minutes?between two coats,
Air-Drying Time: Allow 10-15 minutes air drying time before force drying
Drying Time Temperature Dust Free? Tack Free ? Dry?to Handle Dry to?Test
25°C 15 minutes 2 hours?? 4 hours? 5 days
70°C? 3 minutes? 10 minutes 15 minutes ? 45 minutes
Shelf Life 2 years in original sealed can, cool and dry place at 20℃.
Package? 5L×4?or?2.5L×8?or?5L+2.5L+1L
Note:
1. This products are extra fast reaction, after mixing clear coat with hardener, just add small quantity of thinner for spraying, the mixture should be used up within 1 hour.
2. The spray viscosity could not be too high, in case of paints defects, such as orange skin.
3. This product is suitable for spots repairs, not suitable for overall repair.
4. At temperature lower than 8°C, a forced dry by baking is recommended.
5. It is recommended to apply at conditions of temperature lower than 25°C and humidity lower than 80%, otherwise there will be defects such as blistering?or?blushing.

Read More