Plastic Machinery
Description
This vertical rubber cutter is mainly used to cut the natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber.
This vertical rubber cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The nylon plate is installed on the base under the cutting knife for protecting the edge of the cutting knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.
1. Used to cutting natural rubber materials or plastic,45mm thickness metal blade,hydraulic driving
2. 8ton and 16ton cutting power,660mm and 1000mm cutting width.
Type XQL-8
Cutting Width(mm) 660
Stroke(mm) 680
Diameter of the piston(mm) 150
Time taken by the stroke(s) 16~25
Power(KW) 5.5
Overall Dimension (mm) 1900*720*2580
Weight(kg) 1500
Type XQL-16
Cutting Width(mm) 1000
Stroke(mm) 680
Diameter of the piston(mm) 150
Time taken by the stroke(s) 16~25
Power(KW) 5.5
Overall Dimension (mm) 2240*720*2580
Weight(kg) 2000
Read More
Qingdao Xincheng Yiming Rubber Machinery Co.,Ltd
rubber and plastic processing machinery
Address: Huangshan Economic Zone,Jiaonan,Qingdao City,China,
Qingdao, Shandong
China, 266424
Tel: 0086-532-83121822
Fax: 0086-532-83122277
