Metal Mineral

1. Home
2. Products
3. Minerals & Metallurgy
4. Metal Mineral

Share us

0.4 Micron Grain Size Tungsten Carbide Rod Blanks , 3800 MPa tungsten carbide bar

AIA-1

Send Inquiry

Description

0.4 micron grain size Tungsten Carbide Rod Blanks, 3800 MPa Strength in metric size

?


Description:?

?

Cemented carbide essentially consists of two main components: hard metal tungsten carbide (WC) and binding agent Co. Carbide contributes to high hardness property in a most important degree for hard metal WC, while cobalt maintains its relative high toughness at the high level of hardness.

?

With Hot Isostatic Pressing sintering technique, cemented carbide material is fully consolidated by simultaneous application of heat and pressure, producing a close-to-full-density state. Consequently, the technique greatly optimizes rod’s quality, being more stable and reliable.?

?

Our standard carbide rods are available un-ground(metric dimension), but we are capable of satisfying all of your special needs.

?

Carbide, due to unique characteristics of wear resistance, heat resistance, strength, toughness and hardness that make it ideal for many industrial applications, especially as a material for cutting tools.?

?

- ISO Range: K40-K50

?

- with 88% tungsten carbide, 12% cobalt?

?

- Made of 0.4 micron ultrafine TC powder

?

- Hardness:?92.3 - 92.5 HRA

?

- Bending strength: ≥3800 MPA

?

- Density: ?14.17 g/cm3

?

- As sintered
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ??
- Standard metric length: unground cut to?length

?

?

Specifications:
?


?

Solid?rods-?cut?to?length(Metric):

?

- - - -
D | Tolerance?of?D | Length | D | Tolerance?of?D | Length |
mm | (mm) | mm | mm | (mm) | mm |
3.0 | +0.2/+0.4 | 38.5 | 8.0 | +0.2/+0.4 | 100 |
3.0 | +0.2/+0.4 | 50 | 8.0 | +0.2/+0.4 | 150 |
3.0 | +0.2/+0.4 | 60 | 9.0 | +0.2/+0.4 | 100 |
3.0 | +0.2/+0.4 | 75 | 10.0 | +0.2/+0.4 | 75 |
3.0 | +0.2/+0.4 | 100 | 10.0 | +0.2/+0.4 | 120 |
4.0 | +0.2/+0.4 | 50 | 10.0 | +0.2/+0.4 | 150 |
4.0 | +0.2/+0.4 | 60 | 10.0 | +0.2/+0.4 | 200 |
4.0 | +0.2/+0.4 | 75 | 11.0 | +0.2/+0.4 | 100 |
4.0 | +0.2/+0.4 | 100 | 12.0 | +0.2/+0.4 | 75 |
5.0 | +0.2/+0.4 | 50 | 12.0 | +0.2/+0.4 | 100 |
5.0 | +0.2/+0.4 | 60 | 12.0 | +0.2/+0.4 | 120 |
5.0 | +0.2/+0.4 | 75 | 12.0 | +0.2/+0.4 | 150 |
5.0 | +0.2/+0.4 | 100 | 14.0 | +0.2/+0.4 | 75 |
6.0 | +0.2/+0.4 | 50 | 14.0 | +0.2/+0.4 | 150 |
6.0 | +0.2/+0.4 | 75 | 16.0 | +0.2/+0.4 | 100 |
6.0 | +0.2/+0.4 | 100 | 16.0 | +0.2/+0.4 | 150 |
6.0 | +0.2/+0.4 | 150 | 18.0 | +0.2/+0.4 | 100 |
6.0 | +0.2/+0.4 | 60 | 20.0 | +0.2/+0.4 | 100 |
8.0 | +0.2/+0.4 | 75 | 20.0 | +0.2/+0.4 | 150 |
- - - -

?
?
Areas?of?Application:

?

We would be glad to advise you when choosing the grades to suit optimally your requirements. Following are applications that our HF25(K40 - K50) fits for cutting.?

?

? ??1.?Corrosion?and?heat?resistant?steel
????2.?Stainless?steel
????3.?Non?ferrous?metals
????4.?Titanium?alloys

?

?

Competitive Advantage:

?

Carbide is an alloy material with unique characteristics of wear resistance, heat resistance, strength, toughness and hardness, so it is an ideal raw material for making cutting tools in many application fields.
Our standard carbide rods are available un-ground and finish-ground (metric diameters), but we are capable of satisfying all of your special needs.

?

From tungsten powder to tungsten carbide powder and then to cemented carbide rod, we monitor the whole production process all by ourselves, as we started our business with tungsten powder, winning high reputation in this industry. Thus, the quality of material is strictly and perfectly guaranteed. ?

Read More