Minerals & Metallurgy Agents
3800 MPa Sintering Cemented Carbide blanks bar with CO 12% , Density 14.17 g / cm3
AIA-1
Description
Bending Strength 3800 MPa Cemented Carbide Rods with CO 12%, Density 14.17 g / cm3
?
Description:?
Cemented carbide rod is also known as tungsten carbide rod, hard alloy rod, hard metal rod. It is an alloy material consists of a hard refractory metal compound and bonding metal by powder metallurgy process.
Tungsten carbide rod is a WC-Co alloy, Co content 10%, made up by 0.6um ultrafine grain through Sinter-HIP technology, which is simultaneous application of heat and pressure fully consolidates the carbide during the sintering process.
?
We adopt automatical temperature control system and advanced sintering technology to reduce the probability of porosities, which efficient increase the mechanical property of rod blank. Our Carbide rods product quality is stable and reliable, which have a good shock resistance, abrasion resistant and bending resistance in use.
?
Tungsten carbide rod can offer best-fit solutions for special work piece metals such as harden material with high wear resistance. So it is widely used for making carbide cutting tools, such as end mill, drill, reamer and so on.
?
?
Parameter
?
- - - -
Jinlei?Grade | HF25 |
ISO-range | K40-K50 |
WC?incl.?Doping?(%) | 88 |
Co?(%) | 12 |
Grain?Size?(μm) | 0.4 |
Hardness?(HRA) | 92.3-92.5 |
TRS?(MPa) | ≥3800 |
Density?(g/cm3) | 14.17 |
Features | Excellent?hardness |
- - - -
?
?
Specification:
Solid?rods-?cut?to?length(Metric):
?
- - - -
D ground | L | D ground | L | D ground | L |
h6 (mm) | Tol. (+1.5mm) | h6 (mm) | Tol. (+1.5mm) | h6 (mm) | Tol. (+1.5mm) |
2.0 | 32 | 8.0 | 44 | 12.0 | 84 |
3.0 | 32 | 8.0 | 56 | 12.0 | 101 |
3.0 | 38 | 8.0 | 59 | 12.0 | 151 |
3.0 | 39 | 8.0 | 62 | 14.0 | 59 |
3.0 | 47 | 8.0 | 64 | 14.0 | 76 |
3.0 | 52 | 8.0 | 76 | 14.0 | 84 |
3.0 | 76 | 8.0 | 101 | 14.0 | 151 |
4.0 | 32 | 9.0 | 62 | 16.0 | 63 |
4.0 | 40 | 9.0 | 69 | 16.0 | 75 |
4.0 | 51 | 10.0 | 49 | 16.0 | 77 |
4.0 | 59 | 10.0 | 51 | 16.0 | 83 |
4.0 | 63 | 10.0 | 56 | 16.0 | 93 |
4.0 | 67 | 10.0 | 67 | 16.0 | 151 |
4.0 | 76 | 10.0 | 71 | 18.0 | 85 |
5.0 | 51 | 10.0 | 73 | 18.0 | 93 |
6.0 | 37 | 10.0 | 77 | 18.0 | 101 |
6.0 | 39 | 10.0 | 101 | 18.0 | 151 |
6.0 | 40 | 11.0 | 72 | 20.0 | 76 |
6.0 | 46 | 11.0 | 85 | 20.0 | 93 |
6.0 | 51 | 12.0 | 56 | 20.0 | 100 |
6.0 | 55 | 12.0 | 70 | 20.0 | 102 |
6.0 | 58 | 12.0 | 72 | 20.0 | 105 |
6.0 | 76 | 12.0 | 74 | 20.0 | 151 |
- - - -
?
Areas?of?Application:
?
We would be glad to advise you when choosing the grades to suit optimally your requirements. Following are applications that our HF25(K40 - K50) fits for cutting.?
? ? 1. Corrosion and heat resistant steel
? ? 2. Stainless steel
? ? 3. Non ferrous metals
? ? 4. Titanium alloys
?
?
Advantage:
?
Cemented carbide consists of natural hard and stable phase, and practically doesn’t lose any level of its high hardness when heating up. Therefore, high speed steel cannot substitute tungsten carbide, as the high hardness of HSS is only in a result of quenching process during which hard phase nucleates & grows and it breaks down when annealing. ? ?
?
Quality can be taken for granted, as we produce tungsten powder, tungsten carbide powder, and material’s quality is for sure guaranteed. About our powder, 11 years are accumulated to be professional, winning high reputation within China, which indicates every pre-process for making solid rods is clearly monitored. Consequently, the quality of solid TC rods is guaranteed to be high and stable.?
Read More
Jiangsu Hetian Technological Material Co., Ltd.
Tungsten Carbide Rod
Address: No.295, Qianluo Village, Dingshu Town, Yixing City, Jiangsu Province, China,
Wuxi, Jiangsu
China, 214000
Tel: 86-510-87490565
Fax: 86-510-87490565
