Metal Stocks
Low Shrinkage Heat Conductive Adhesive , 1.2W/mK LED Heatsink Adhesives and Sealants
AIA-1
Description
Low Shrinkage Heat Conductive Adhesive , 1.2W/mK LED Heatsink Adhesives and Sealants
? ?
? ? ?TIS?580-12 Series?is dealcoholized, 1 component, room temperature cure thermally conductive silicone adhesive. It possesses good heat conduction and adhesion towards electronic components. It can be cured to a higher hardness elastomer, leads to firmly attached to substrates resulting lower down thermal impedance. Thus, heat transfer among heat source, heat-sink, motherboard, metal casing will become effective.?TIS?580-12 Series?possesses high thermal conductivity, excellent electrical insulation and is ready-to-use.?TIS?580-12 Series?has excellent adhesion to copper, aluminium, stainless-steel, etc. As this is a dealcoholized system, it will not corrode, especially, metal surfaces.
?
Feature
?
> ?Good thermal conductivity: 1.2W/mK
> ?Good maneuverability and good adhesion
> ?Low shrinkage
> ?Low viscosity, leads to void-free surface
> ?Good solvent resistance, water resistance
> ?Longer working life
> ?Excellent thermal shock resistance
?
Application
?
It mainly used in substituting thermally-conductive paste and pads, which currently finds in gap-filling adhesives or heat conduction between LED aluminium motherboard and heat sink, high power electrical module and heat sink. Traditional methods such as fins and screws fixing can be replaced by applying TIS580-12, resulting a more reliable gap-filling thermal conduction, simplified handling and more cost-effective.E.g. Massive application in integrated circuits in portable computer, microprocessor, high power LED, internal storage module, cache, integrated circuits, DC/AC translator, IGBT and other power modules, encapsulation of semi-conductors, relay switches, rectifiers and transfomers?
?
- - - -
Typical values of TISTM580-12 |
Appearance | White paste | Test Method |
Density(g/cm3,25℃) | 1.2 | ASTM D297 |
Tack-free time(min,25℃) | ≤20 | ***** |
Cure type(1-component) | Dealcoholized | ***** |
Viscosity@25℃ Brookfield (Uncured) | 5000 cps | ASTM D1084 |
Total cure time(d, 25℃) | 3-7 | ***** |
Elongation(%) | ≥150 | ASTM D412 |
Hardness(Shore? A) | 25 | ASTM D2240 |
Lap Shear Strength(MPa) | ≥2.0 | ASTM D1876 |
Peel Strength(N/mm) | ＞3.5 | ASTM D1876 |
Operation temperature(℃) | -60～250 | ***** |
Volume Resistivity(Ω·cm) | 2.0×1016 | ASTM D257 |
Dielectric Strength(KV/mm) | 21 | ASTM D149 |
Dielectric Constant (1.2MHz) | 2.9 | ASTM D150 |
Thermal Conductivity W/(m·K) | 1.2 | ASTM D5470 |
Flame Retardancy | UL94 V-0 | E331100 |
- - - -
?
?
??
Read More
Previous
Black High Thermally Conductive Mobile Phone Graphite Gasket Material with 715psi Tensile Strength...
Dongguan Ziitek Electronic Materials & Technology Ltd.
Phase Changing Materials,Thermal Conductive Pad,Thermal Gap Filler
Address: Building B8, Industry District 鈪?City=Dongguan,
, Guangdong
China, 511700
Tel: 86-769-38801208
Fax: 86-769-83791290
