New Materials
Description
?
Astm A269 Tp304 Seamless Stainless Steel Tube, 4 -76.2mm Steel Tube
?
Specifications
astm a269 tp304 seamless stainless steel tube?
ISO9001:2008?
1) Diameters: 4 -76.2mm?
2) W.T.: 0.4 - 2.5mm?
Raw material from PO
?
Raw material from POSCO
stainless steel tube for heat exchanger,evaporater,condenser,cooler,boiler,muffler?
Specifications:
1) Diameters: 4 - 76.2mm
2) W.T.: 0.4 - 2.5mm
3) Grades: 316L/304/304L/310S,etc.
4) standard:GB/ISO/EN/ASTM/JIS,etc.
5) application range:widely use in the foodstuff,medical equipment,power,boiler,cooler,auto,condenser etc.
6) packing: inner packing:1 pc/plastic bag;outer packing:bundles in weaving bags or in plywooden case.
?
?
- - - -
Dimension tolerance comparison Chart |
OD(mm) | GB/T3639 | DIN2391(EN10305) | We can control | Our Advantage |
6-30mm | ±0.10mm | ±0.08mm | ±0.05mm | ±0.02mm |
31-40mm | ±0.15mm | ±0.15mm | ±0.05mm | ±0.03mm |
41-50mm | ±0.20mm | ±0.20mm | ±0.05mm | ±0.03mm |
51-60mm | ±0.25mm | ±0.25mm | ±0.08mm | ±0.03mm |
61-65mm | ±0.30mm | ±0.30mm | ±0.10mm | ±0.05mm |
Thick tolerance | ±0.12mm | ±0.10mm | ±0.05mm | ±0.03mm ? |
- - - -
?
?
?
?
1, Size accuracy
The outside path admission deviation that solder take care of includes the elliptical park a cent Ⅰ , Ⅱ two class, see the table 3, table 4.
?
- - - -
ⅠOutside path in class deviation mm table 3 | ? | Outside path inⅡ class deviation mm table 4 |
- - - -
Outside path | Admission deviation |
<25 | ±0.10 |
≥25~38.1 | ±0.15 |
>38.1~50 | ±0.20 |
≥50~63.5 | 0.25 |
>63.5~76 | ±0.30 |
≥76~102 | ±0.40 |
- - - -
| ? |
- - - -
Outside path | Admission deviation |
≤10 | ±0.15 |
>10~32 | ±0.20 |
>32~50 | ±0.30 |
>50 | ±0.8% |
? | ? |
? | ? |
- - - -
|
- - - -
?
?
?
The thick the deviation of admission( do not include the weld sew) in wall of the weld tube is for ruling the wall thick 10% of ±, but minimum admission deviation is the 0.02 mms of ±.
The weld takes care of of settle Chinese foot length as 3 ms~9 ms, general settle the Chinese foot with the 6 ms.
The weld takes care of of settle the Chinese foot length in usually length, its the deviation of admission is the 5 mms of ±.
Adopt partial the degree of flinch in a the tube of weldfor keeping the Chinese foot measurement should not very in 2.0 mms.
Read More
Previous
Mechanical S45C Seamless Steel Tube / piping , Cold Rolled Steel Pipe for hydraulic pressure service...
Zhangjiagang A.P Steel Co.,Ltd.
Seamless Steel Tube,Seamless Alloy Steel Tube,Seamless Boiler Tubes
Address: #2212,New Orient Plaza, Zhangjiagang City,Jiangsu Province, China,
Suzhou, Jiangsu
China, 215600
Tel: 86-512-58799398
Fax: 86-512-58900171
