Pneumatic Components
20 Tubes Heat Pipe Solar Collector With Aluminum Alloy Bracket For Flat Roof
ILHC-5820H-F
Description
20 Tubes Heat Pipe Solar Collector With Aluminum Alloy Bracket For Flat Roof
?
- - - -
Heat Pipe
Vacuum Tube | Size (mm) | Φ47×1500 , Φ58×1800 |
Tubes (pcs) | 12 / 15 / 18/ 20 / 25 / 30 |
Material | Three-target vacuum tube, red copper heat pipe, aluminum fin |
Coating | Cu/SS-ALN(H)/SS-ALN(L)/ALN |
Aluminum Alloy Manifold | Flow passage | High-quality red copper Φ35*1.0mm |
Outer shell | Slivery Aluminum alloy plate 2mm |
Insulation | Processed high-density rockwool/ polyurethane |
Frame and Bracket | Slivery Aluminum alloy 1.8~2.0mm |
Accessories | Stainless bolts & nuts, dust-proof rubber seal, plastic tube holder |
Working Pressure | 2.0-7.0 bar |
Tilt Angle | 10°~ 80° (ensure the best heat efficiency for gravity heat pipe) |
Hail Resistance | ≤ Φ25mm diameter |
Anti-freezing | ≤ -40°C |
- - - -
?
?
Description:
The heat pipe solar collector consists of heat pipe glass vacuum tube, pressurized manifold, supporting bracket and other related accessories
1) Solar heat pipe and its inner medium for thermal conduction, with a quick start and super daily efficiency about 55% in summer and 42% in winter, much more than that of the all-glass tube
2) The flow passage is inner closed and pressurized, no water or medium goes through glass vacuum tubes, no freeze to break vacuum tubes, able to serve in extremely cold weather
3) Heat pipe tip is inserted into a closed cannula welded into the copper flow passage, collector works well even withdrawal one or several heat pipe vacuum tubes
4) Aluminum alloy as bracket with super performance in chemical resistance, universal bracket suitable for slope and flat roof installation
5) Modularized collector, arbitrary combination with any architectural structure, adaptable to either slope roof or flat ground or upright walls, almost maintenance free collector
?
?
?
?
?
20 Tubes Heat Pipe Solar Collector With Aluminum Alloy Bracket For Flat Roof??working principle
?
?
1.Patented technology heat pipe has faster start speed, higher temperature and longer using life.
2. Glass wool and PU foam combined insulation layer, less heat loss than single glass wool insulation layer.
3. Double-jacket heat pipe bottom ensures the perfect performance of frost-resistance. INLIGHT heat pipe solar collectors work very well in extreme cold regions.
4. Module design, alterable frame and support, make the installation place quite flexible. They can be fixed on ground, roof or exterior wall
?
Applications:
Domestic hot water for shower, washing. Solar Thermal, Project: such as School, Hospital, Hotel.
?
Competitive Advantage:
1. With special copper heat pipes,rapid heat transfer,more reliable,higher efficient
2. Perfect appearance anti-freeze,can be used in extreme cold area
3. No water in the vacuum tubes,even one glass vacuum tube broke,the whole system still can work as usual,no leakage
4. Can be connected with high pressure water pipe directly(max working pressure reach to 700 kPa)
5. Solar collector and storage tank is seperated installation
6. Pretty free installation of solar collector and storage tank according to building.
7. Easy plug-in installation and free maintenance
Read More
Haining Yinuo Electric Co.Ltd
Solar Heater Collector,Non Pressurized Solar Water Heater,Pressurized Solar Water Heater
Address: No.20, Zhangmumiao, Zhongle Village, Xieqiao Town,
Jiaxing, Zhejiang
China, 314000
Tel: 86-573-87706600
Fax: 86-573-87218666
