Precision Parts

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Precision Parts

Share us

Food Grade Pressurized Solar Water Heater With 20 Tubes Aluminum Reflector Frame

ILCP-5818S470S-20T-F

Send Inquiry

Description

Compact Pressure SUS304-2B Heat Pipe Solar Water Heater With 20tubes Aluminum Reflector Frame

?

- - - -
? Heat Pipe Vacuum Tube | Glass Tube | Φ58*1800mm three-target coat SS-AL-N/CU |
Heat-conduction | Copper heat pipe tube wrapped with aluminum |
Tube Qty | 20tubes |
Water Tank | Capacity | 90L - 300L |
Inner tank | Stainless steel SUS304-2B or SUS316L |
Insulation | Integral high-density polyurethane foam |
Tank shell | Stainless Steel SUS304-2B |
Bracket | Material | Aluminum Alloy?with Aluminum Reflector |
Tilt angle | 25°- 50° according to local latitude |
Optional Device | Electrical heater, T/P valve, Safety valve, Anode magnesium |
Water Output | 45-95oC according to local solar irradiation and duration |
Working Pressure | 6.0 bar |
Hail Resistance | Φ25mm |
Wind Resistance | 140 km/h |
- - - -

?

Description
1) Inner tank material: SUS304-2B stainless steel. Available thickness is 1.2-1.5mm.
2) Outer tank material: stainless steel SUS304-2B
Available thickness is 0.4mm.
3) Heat pipe Vacuum tube: 58x1800mm
Material: High borosilicate glass, three-layer coated vacuum tube.
Over 15 years service life. Hail resistance: 25mm.
4) Insulation layer: High density polyurethane foam, available thickness is 55mm.
5) Very popular tank capacity in present markets is 150-300L.
6) Frame material: Aluminum alloy with?Aluminum Reflector

?



?

?

Compact Pressure SUS 304-2B Heat Pipe Solar Water Heater With 20tubes Aluminum Reflector Frame?working principle

?

The water storage tank is a closed pressure reservoir without any air-vent, hence the outlet hot water shares the same pressure with the inlet cold water.

?

Heat pipe heads are plugged into the pipe caps which are fixed in a row in storage tank, the vacuum tubes absorbs solar irradiation with its coating and transfer to heat pipe tubes through aluminum fins, the heat-conduction liquid inside heat pipe tube will vaporize and rise to heat pipe head to release heat to water inside storage tank through the pipe caps, then the vapor will condense to form liquid and flows down to heat pipe bottom and wait for second heat transfer.






Applications:

Domestic hot water for shower, washing

?

Competitive Advantage:
?

1.INLIGHT heat pipe tube for thermal transmission, with super heat exchanging efficiency and rapid hot water heating

2. The whole system is pressurized and works under high water pressure automatically, more comfortable shower.

3. Water does not flow into glass tubes, withdrawal of one or several heat pipe tubes would not drain out the whole system;

4. Super heat preservation with integrated polyurethane foam; No air-vent with little heat loss in tank and water pipeline

5. Design of pressurized tank is reasonable and scientific, which could hold 100,000 times fatigue test without any damage.

6. Designed to be equipped with auxiliary electric booster and intelligent controller for much more automatic operation;

7. Anti-freezing solar water heater which is able to be used all year round even in extremely cold climate;

8.Simple structure, easy for assembly and installation on different roof structure

Read More