Power Distribution Equipment
Description
Sinopak Medium-voltage soft starter adopts magnetically controlled reactor (MCR) to limit motor starting up current. It has the features: High control precision, large starting capacity, strong insulation performance and small volume etc. The equipment can be widely used for various large-scale motors such as: fans, water pumps and compressors etc.
Features
Sinopak magnetically controlled soft starter consists of the incoming line, switch, magnetically controlled reactor and controller. The equipment controls MCR reactance through changing magnetic permeability of iron core with DC excitation current, so it is called magnetically controlled soft starter.
Technical Parameters
MCR withstand voltage: Three phase to earth:30KV/Min Inter-phase:30KV/Min
Harmonic content:None
Starting current times:1.5~4
Voltage fluctuation:5%
Starting time:0~60S
Continuous starting times:0~6
Anti-interference:EMC level-four
Motor power factor:0.86
Flux leakage:No flux leakage
Cooling method:Natural cooling
Operation temperature:-10 degree ~45 degree
Altitude:1000m
Noise:less than 70DB
Incoming direction:Upper /Lower
Communication:CAN, Profibus RS232 and RS485 etc. (Optional)
Read More
Previous
Sinopak SSCT...
Zhuhai Sinopak Electric Ltd
Medium voltage variable frequency drives, LV VFD, soft starter, variable frequency inverter, MVLV SVG, statcom, active power filter, apf, active harmonic filter, flameproof vfd
Address: Room 202, Block A, No. 80 Shishan Village, Hengqin Town ,
Zhuhai, Guangdong
China, 519031
Tel: 86-756-7755124
Fax:
