Precision Parts
Description
Main component of the line:
- - - -
NO. | name | quantity |
1 | Un-coiler (2 tons ) MANUAL | 1 |
2 | roll former | 1 |
3 | Hydraulic cutter | 1 |
4 | PLC control cabinet | 1 |
5 | Output table with rollers(6 meters) | 1 |
- - - -
?
TECHNICAL DETAILS
Un-coiler
?
1. Capacity: 2 tons
2. Material: #45 steel quenched
3. Inner diameter: 410~ 580mm
Main roll former
1. Stations: 22
2. Rollers material: CR 15; HRC 60. Chrome coated: 0.03~0.05mm. The Strength in Mpa: 70 TON,800 MPA
3. Shaft material: Diameter: 50mm, material is #45 steel. Quenched: hot treatment. The strength of the Main Shaft in Mpa:70 tons, 650MPA
4. Bearing brand: FAG Germany
5. Main Motor:?11 KW, 380V, 50HZ
?
CHAMICAL COMPOSITION:
- - - -
? | C | SI | MN | P | S | CR | NI | CU | MO | AI | V | B |
Shaft | 0.450 | 0.220 | 0.540 | 0.027 | 0.008 | 0.050 | 0.020 | 0.010 | 0.000 | 0.009 | 0.000 | 0 |
Rollers | 1.00 | 0.32 | 0.33 | 0.011 | 0.003 | 1.49 | 0.05 | 0.00 | 0.02 | 0.041 | ? | ? |
Cutter | 1.57 | 0.34 | 0.38 | 0.022 | 0.010 | 11.10 | 0.18 | 0.14 | 0.48 | ? | ? | ? |
Cut knife | 2.04 | 0.23 | 0.23 | 0.020 | 0.010 | 11.66 | 0.12 | 0.06 | ? | ? | ? | ? |
- - - -
?
PLC Control Cabinet:
1. Touch screen brand: Delta
2. PLC brand: Delta
3. Inverter brand: Delta
4. Main components for low pressure electricity: Schneider Germany
?
Output table
1. Length: 6 meters
2. Drive type: Rollers
CUTTING PLATFORM
1. Cutting type: Hydraulic cutter
2. Motor: 4KW; 380V; 50HZ
3. Material of cut die: CR12MOV; Quenched; the Strength in MPA: 950
?
Read More
Previous
Hydraulic Cutter Perforated Shutter Door Roll Forming Machine With Automatic Punching System...
WUXI LONGBO ROLL FORMING MACHINERY CO.,LTD.
Shutter Door Roll Forming Machine,Door Frame Roll Forming Machine,Roof Panel Roll Forming Machine
Address: NO:1 Wankun Road, Xinba Industrial Zone, Xibei Town, Xishan district,
Wuxi, Jiangsu
China, 214000
Tel: 86-510-88718069
Fax: 86-510-88718069
