Industrial Lighting
Description
Main specification
?
- - - -
No | Specification of the material |
1 ? | Suitable Material | Carbon steel |
2 ? | Width of the raw material | Based on the purlin sizes. |
3 | Thickness | 5.0mm |
- - - -
?
1. Profile drawing:
?
?
The Chart of Process Flow
?
Manual Un-coiler—Leveling —Punching—Roll Forming—Cutting—out table
?
?
Specification of Components
?
- - - -
No | ? | Technical Specification & Remark |
1 | Hydraulic Un-coiler ? | # Steel coil width: 550 mm; # Internal diameter of coil: variable, from 470 mm to 520 mm # Maximum coil weight: 5000 Kg; # Main motor power: 5.5KW # Hydraulic power: 4kw |
2 | Leveling part ? | # Flattener roller: upper is 3 rollers, down is 4 stations(total is 7 rollers) # Flattener roller material: SAE 1045 thermal treatment hardness 48-52 HRC. # Diameter of flattener shaft:￠100mm, material is Gcr15, hardening and tempering |
3 | Punching system ? | # The punches and dollies will be CR-12, hardness HRC 58-62 and chrome coating. # The whole punching operation should be automated and controlled by a program installed in the PC which is located in the operator& acute;s console. # Hydraulic power: 7.5kw |
4 | Main Roll Forming Machine ? | # Roll station:14stations +1 station of turkey head # Roller material:Gcr15, 58-62,HRC hardness and chrome plated surface # Shaft diameter: ￠120mm material: SAE1045 # Gear box driving |
5 | Machine structure: ? | # Main frame by 350H beam welding # Machine structure: wall board panel |
6 | Hydraulic cutting system ? | # Machine adopt hydraulic post cutting system. # Cutting power by hydraulic, 7.5KW # Cutting after forming: Cut the sheet after roll forming to required length # Cutting motion: The main machine will stop when cutting, after the motion the machine will continue automatically. # Material of blade:Cr12 with heat treatment 58-60° # Tolerance of length: 3000mm+/- 1.5mm |
7 | Hydraulic System ? | ? ? ? # Hydraulic power: 7.5kw # Solenoid valve: 2 group # Hydraulic oil: 46# hydraulic oil ? ? |
8 | Computer Control Cabinet ? ? | ? # Programmable setting of profile length and quantity # Operating system language: English and Chinese # Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved # Length inaccuracy can be amended easily. # PLC brand: Panasonic |
9 | Out table ? | # Jointed by steel tube # Size: about 2.0m long*0.8mwide*0.6-1mhigh # One out table with three support roller # Quantity: 2 units |
- - - -
?
?
?
Read More
Zhangjiagang City Saibo Science & Technology Co.,Ltd
Roof Panel Roll Forming Machine,Double Layer Roll Forming Machine,Tile Roll Forming Machine
Address: Hetou village industrial park, Yangshe town,
Suzhou, Jiangsu
China, 215000
Tel: 86-512-58162333
Fax: 86-512-58162111
