Others

Share us

DIN F4 / F5 Resilient Seated Gear Operated Gate Valve With Worm / Lock / Actuator

Z45X

Description

Resilient Seated Gate Valve With Gear / Worm / Lock / Extened Stem / Actuator

?

A. Stem sealing


Three independent stem seals offering triple safety:


? ?A NBR wiper ring protects against dirt from outside.


? ?A polyamid bearing with 4 NBR O-rings protects?against galvanic corrosion.


? An EPDM rubber manchette sealing acts as the?main hydraulic seal to the flow.


B. Body/bonnet connection


The unique assembly of the valve body and bonnet?ensures a durable tightness:


? ?A round rubber bonnet gasket fits into a recess in?the valve bonnet preventing it

? ?from being blown out?by pressure surges.


? ?The stainless steel bonnet bolts are countersunk in?the valve bonnet, encircled

? ? by the bonnet gasket?and sealed with hot melt. Thus there is no risk of?corrosion

? ? as the bolts are not exposed to the?medium or soil.

?

C. Wedge nut


The fixed, integral wedge nut reduces the number of?movable valve parts thus

minimizing the risk of?corrosion and malfunction. The wedge nut is made of
dezincification resistant brass with lubricating abilities?providing optimum compatibility

with the stainless?steel stem.


D. Vulcanized wedge


The ductile iron core is fully vulcanized with drinking?water approved EPDM rubber

internally and?externally.

?

No iron parts are exposed to the medium?and the excellent rubber vulcanization

prevents?creeping corrosion underneath the rubber.

?

Guides in?the wedge and on the valve body ensure a uniform?closure regardless of

high pressure.

?

Safe operation is?ensured, as the guides prevent overloading of the?stem.

?

The wedge has a large through bore and as?there are no hollows in the core, stagnant

water or?impurities cannot collect and cause contamination.

?

Design features:
?

Spindle’s gaskets O-ring - “DRY THREAD” -?replaceable under pressure.


Stainless steel spindle with rolled thread and?bearing.


Total sufrace rubbered wedge with replaceable?spindle nut.


Gate valve with full bore.


All parts are protected against corrosion.

?

?

Resilient seated gate valve to EN 1074-1 and 2 / EN 1171, with WRAS approved EPDM
rubber parts.


Body and bonnet of GJS-500-7 (GGG-50). Wedge of ductile iron with fixed wedge nut,

fully vulcanized with EPDM rubber. Stem of stainless steel min. 13% Cr with rolled thread
and wedge stop ring.

?

Stem sealing with 4 O-rings in a nylon bearing, an EPDM rubber?manchette, and a NBR

wiper ring. EPDM bonnet gasket in a groove, countersunk bonnet?bolts encircled by the

bonnet gasket and sealed with hot melt. Sockets fitted with & quot;Euro& quot;?sealing rings of EPDM

rubber.


Epoxy coating to DIN 30677-2 and GSK guidelines - internally and externally.
?

?

?

?

The valve gate or closure member is typically in the form of a wedge made of cast iron material

so as to be sufficiently rugged so as to be suitable for high pressure and high flow applications.?

?

In a resilient seat gate valve, the outer surface of the valve wedge is coated with an elastomeric

material so as to offer a bubble-tight seal even at elevated operating pressures.?

?

The valve wedge is operated by turning a threaded stem so as to advance or retract the valve

wedge within the waterway of the valve housing.?

?

Upon valve closure, the resilient material on the edge forms a bubble-tight seal with the internal

surface of the valve body. Dirt or other contamination in the valve operating system can lead to

incomplete sealing of the wedge or other malfunction.

?

Another object of the present invention is to provide a resilient seat gate valve having an

improved wedge operator system which readily overcomes the deleterious effects of contamination introduced either during construction or entrained within product carried to the valve.

?

These and other objects of the present invention which will become apparent from studying the

appended description and drawings are provided in a valve arrangement, that comprises a valve

housing that defines a water passageway and a valve seat within the valve passageway.?

?

A valve wedge disposed within the housing passageway moves along a direction of operation

between a closed position in contact with the valve seat to block flow of water through the valve

passageway and an open position allowing flow of water through the valve passageway.?

?

A pair of spaced apart tracks are disposed within the valve housing on either side of the wedge

and extend along the direction of operation. A pair of opposed wings carried on the valve wedge,

travel in each track. A valve stem coupled to the valve wedge moves the valve wedge in opposite reciprocating directions between valve open and valve closed positions.?

?

Rollers are carried on the wings for rolling engagement with the tracks and scraper blades are

carried on the wings adjacent the rollers to scrape contamination from the tracks.?

?

The tracks may be provided with or without a liner. If a wing is provided without rollers because of

a light loading application, for example, the track is preferably provided without a liner.?

?

A light loading condition may arise, for example, at the upper end of a horizontally oriented

valve arrangement. However, under heavy loading conditions as, for example, at the bottom

end of a horizontally operated valve arrangement, it is preferred that the wings be provided

with load bearing rollers.?

?

In this instance, it is also preferred that the track be provided with a liner of generally U-shaped

cross-section and made of a rugged material such as stainless steel.


?
Specifications:

?

- - - -
NO | Part?name | Material |
1 | Body | Ductile?cast?iron |
2 | Wedge | Ductile?cast?iron?+?EPDM |
3 | Stem?nut | ZCuAl10Fe3?Gunmetal |
4 | Gasket | EPDM |
5 | Bonnet | Ductile?cast?iron |
6 | Gland?gasket | ZCuAl10Fe3?Gunmetal |
7 | Stem | 2Cr13??S.S.x?20Cr13 |
8 | Gland | Ductile?cast?iron |
9 | Rubber?wiper | EPDM/NBR |
10 | Hand?wheel | Ductile?cast?iron |
- - - -

?
?

FEATURES?

?

⊙ Shot-blasting?

protective?surface?finished?by?shot-blasting?and?the?surface?is?smooth?and?neatness.?

?

⊙ Flatting?seat?

Smooth?continuous?bore?way?without?seating?recess,?it?is?not?easy?to?get?impurity?pilled?up.?

Making?the?liquid?straightway.?

?

⊙ Treating?with?rubber?

Both?inner?and?outer?are?coated?with?advanced?knowledge?of?rubber?vulcanization?then?making?

sure?of?the?elasticity?of?rubber?,and?make?sure?the?exact?geometry?dimension.?Rubber?and?ductile

?cast?iron?valve?hand?together?hardly.?This?can?avoid?fall-off?due?to?long-term?use.?

?

⊙ Anti-?corrosion?

Both?inner?and?outer?are?coated?with?non-toxic?powder?epoxy?resin?to?strengthen?the?capacity?of?Corrosion?resisting?and?raise?the?quality?

of?water?supply.?

?

⊙ Ruggedization?

The?older?ductile?iron?valve?is?easy?to?rupture?after?being?impacted?by?nonego.?It?can?stop?

rupture?depend?on?the?good?mechanics?capability?of?ductile?iron?.?

?

⊙ Three?“○”?sealed?ring?

With?the?three?“O”?–?rings,?the?leakage?can?be?greatly?reduced?and?the?“O”?–?ring?can?be?

replaced?under?this?condition?with?pressure?and?without?stopping?water.?The?thrust?axletree?

reduces?the?frictional?resistance?and?lowers?the?operational?torque.?And?it?can?be?switch?seal?

ring?without?opening?and?closing.?

?

⊙ Rigid?round?body?

The?body?is?founded?minutely,?the?rigid?geometry?size?ensure?inner?sealing?of?valve?without?

any?process.?

?

⊙ Light?weight?

This?body?is?made?of?ductile?iron,?it?is?20%-30%?lighter?than?the?olds.?Easily?to?fixing?and?

servicing.?

?

Applications :?This?valve?widely?applied?in?the?liquid?pipes?for?opening?or?closing?fixing?in?such

?water,?sewage?disposal,?electric?power,?energetics?pipe?,?chemical,?shipping,?energy?sources?etc.


?
?
APPLICABLE?STANDARDS?
?
⊙ American?Standard?
Design?to?ANSI/AWWA?C509?
Face?to?face?dimension?to?ASME?B16.10-2000(ISO?3?series)?
Flange?and?drilling?To?SME/ANSI?B16.42-1998?


⊙ British?Standard?
Design?to?BS5163,BS5150?
Face?to?face?dimension?to?BS5163(ISO?3series,ISO19?series)?
Flange?and?drilling?To?BS4504?part1(EN1092)?


⊙ Germany?Standard?
Design?to?DIN3352?
Face?to?face?dimension?to?DIN3202(F4:ISO?14?series;F5:?ISO?15?series)?
Flange?and?drilling?to?BS?EN1092?
?
Applications:?This?valve?widely?applied?in?the?liquid?pipes?for?opening?or?closing?fixing?in?such?water,?

sewage?disposal,?electric?power,?energetics?pipe?,?chemical,?shipping,?energy?sources?etc.
?



?

cheap prodocuts, china suppliers,

Read More

Previous

Soft Sealing / Rubber Seat And Wedge Resilient Seated Gate Valve Full Bore...

Previous

Small Size Metal Resilient Seated Gate Valve For Water Meter With Thread End DN 25...

Shanghai kangquan Valve Co. Ltd.

Resilient Seated Gate Valve,Cast Steel Gate Valve,Water Meter Strainer

Address: No.159 Jiugan road Sijing industrial zone Songjiang District,
Shanghai, Shanghai
China, 200000

Tel: 86-021-57626759
Fax: 86-021-57617555

H5响应式定制设计
26种语言,SEO营销型网站


H5/响应式/营销型企业网站; 26种语言扩展;
覆盖: 英文、法语、德语、西班牙语、葡萄牙语、俄语、阿拉伯语、波斯语、日语、韩语
了解更多