Power Distribution Equipment

1. Home
2. Products
3. Electronic & Electrical
4. Power Distribution Equipment

Share us

LM4 / LM5 Adjustable PNP Proximity Switch Inductive Infrared Detection With LED

AIA-1

Send Inquiry

Description

LM4 / LM5 Adjustable PNP Proximity Switch Inductive Infrared Detection?With LED ? Technique parameter ?
- - - -
DC ULTRA-MINI INDUCTIVE PROXIMITY SENSOR?? |
Diameter | LM4,LM5 |
Shielded??? Non-shielded | Shielded |
Switching Distance Sn:(mm) | 0.8mm / 1.0mm / 1.2mm /1.5mm |
Housing Material | Stainless steel |
With LED??? Without LED | With LED |
Operating Voltage | 10-30V |
Ripple | <10% |
No Load Current | <10mA |
Max.Load Current | 150mA |
Leakage Current | <0.01mA |
Voltage Drop | <1.5V |
Switching Frequency | 2KHz |
Response Time | 0.1ms/0.1ms |
Switching Hysteresis | <15%(Sr) |
Repeat Accuracy | <1.0%(Sr) |
Protection Category | IP67 |
Operating Temperature | -25°C - +70°C |
Temperature Drift | <10%(Sr) |
Short Circuit Protection | YES |
Overload Trip Point | 180mA |
EMC | RFI>3V/M / EFT>1KV / ESD>4KV(contact) |
Shock/Vibration | IEC 60947-5-2,Part 7.4.1 / IEC 60947-5-2,Part 7.4.2 |
Material Active Face | PA66 |
DC 3wire 10-30V NPN N.O. | ?????? IA1T - S05 * N - OPA3 | 25 |
DC 3wire 10-30V NPN N.O. | ?????? IA1T - S05 * N - CPA3 | 25 |
DC 3wire 10-30V PNP N.O. | ?????? IA1T - S05 *?P - OPA3 | 26 |
DC 3wire 10-30V PNP N.C. | ?????? IA1T - S05 *?P - CPA3 | 26 |
Cable2M??(PVC?) ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? | ? |
Weight (g)?? | Approx.14g????????????????????????????????? ? ? |
- - - -

?
?
?

?

?

?

?

?

?

?

?

?

?

?

?

?

?

?

?

?
? ? Features: ? 1 . Compact volume
2 . high precision of repeated location?
3 . Good performance of anti-interference
4 . Many output forms?
5 . High on-off frequency
6 . With short-circuit protection and inverted connecting protection.?
7 . Long service life ? Technique parameter:
1. Switch category(LM: Inductance type; CM: Capactitance type; SM: Hall type; AM: Safety explosion-proof type; XM: Mimic linear type)

2. Outward appearance code(C: Cylinder type; F: Angular column type and planeinstallation type)

3. Operating voltage(30: 6-36VDC; 310: 5-24VDC; 320: 12-60VDC; 20: 90-250VAC; 210: 24-250VAC; 220: 380VAC; 40: 12-240VDC/24-240AC; 50: Special voltage)

4. Detection distance( 01: 1mm; 05: 5mm; 10: 10mm)

5. Output method (N: Three-line DC NPN output; P: Three-line DC PNP output; L: Two-line DC output; AC two-wire output; J: Relay output; NP: NPN+PNP output)

6. Output status(A: NO; B: NC; C: NO+NC; MU: Mimic voltage; MI: Mimic current)

7. Auxi function code(T: With connector; Y: Water proof, oil proof; I: Special requirement; H: High temp resistance; R: Ring type) ? Model explanation of proximity switch
?

?LM ? ? ?18 ? ? ? ? 30 ? ? ?05 ? ? ? N ? ? ?A ? ? ? ?□ ? ? ?/ ? ?L

—— ? ——? - ?—— ?—— ?—— ?—— ?—— ? ? ?——

? 1 ? ? ? ? ?2 ? ? ? ? ? 3 ? ? ? ?4 ? ? ? ?5 ? ? ? 6 ? ? ? ? 7 ? ? ? ? ? 8

?

? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?

- - - -
Switch category | Output form |
? Lm: Inductance type Cm: Capacitance type Sm: Hall type Am: Safety Explosion-proof type Xm: Mimic Linear type Hm: Reed type Ru: Ultrasonic type ?? | N: Three-wire Dc NpN Output P: Three-wire Dc PnP Output L: Two-wire Dc Output ??: Ac Two-wire Output J: Relay Contact Output Np: NpN+PnP Double Output |
Outward appearance code | Output state |
? □: Cylinder type F□: Angular Colum Type And Plane Installation Type ? | ? A: (no) normally Open (no) ? B: (nc) Normally Close (nc) C: (no-nc) normally Open-Normally Close (no+nc) Mu: Mimic Voltage ? ? Mi: Mimic Current Mui: Voltage+Current ? |
Working voltage | Subsidiart functions |
? 30: 6-36VDC ?310:5-24VDC ?320:12-60VDC 330: 10-30VDC ?340:10-55VDC ?350:10-60VDC 360: 5-36VDC ?20:90-250VAC ?210:24-250VAC 220: 380VAC40:12-240VDC/24-240AC 50: Special voltage ? | T: with aviation connector Y: water proof,oil proof I: special requirement? H: high temp resistance R: ring type |
Detection distance | Long-distance |
? 01:1mm ?05:5mm ?10:10mm ...... | L: Long-distance |
- - - -

?

Working priciple inductive proximity switch

?

? ? ? Inductive proximity switch is composed of three parts:oscillator,switch circuit and magnified output?circuit.The?oscillator?will?generate?an?alternating?electric?field.When?hemetal?object?approaches?this?electric?field?and?reaches?the?induction?distance,?whirlpool?will?generate?in?metal?object, resulting in attenuation of vibrati on and then stop.The changeof vibration and stop of oscillator is treated by begid stage magnified circuit and convertedto switching sign,triggering driving con-contact detection.

?? ? Current consumption of inductive proximity switch decreases proportional to the metal object distance.

?

Application illustration of proximity switch

?

1. Various location detection of machinery process center

2. Bottle lid detection

3. Stopper detection of grinding machine

4. Arm location detection of robot

5. Inspection of the exiating of milk inside the paper package

6. Spacing detection

7. Mounting screw switch

8. Adjustable switch actiondistance(sensitivity)

?

Product Picture

?



?
FAQ
?

Q 1. what& acute;s the payment term? ?

A. We accept TT,30% deposit and 70% balance agaisnt copy of BL
?
Q 2. how& acute;s the delivery time ?

A. usually it will take about?15 days for production
?
Q 3. tell me the standard of package?

A. Export standard carton box

?

Q 4. Could you offer Form A or C/O ???

A. It totally not a problem. We can prepare relative documents to forgin affairs office or other office to apply for this certificate.
?
Q 5. Would you accept to use our logo ?

A. If you have good quantity,it absolute no problem to do OEM.
?
Q 6. We want to know month capacity.??

A. It depends on which model.For example for M12 type normal type, month capacity can reach near 20000pcs.
?
Q 7. Where is your market?

A. Our products are popular in Russia, Indonisia, Philippines,Italy, America, Brazil and so on.Some of them are our regular customers and some of them are developing. We hope you can join us and make mutural benifit from our cooperation.

Read More