Camping
Description
?
Yokohama ?floating pneumatic ?marine rubber fender for boats high pressure????
?
?
All our pneumatic marine?rubber fenders are manufactured and tested in accordance with ISO17357:2002.
?
marine ?rubber ?fender?Description:
?
Pneumatic fenders are ideal for permanent & semi-permanent port applications where there is a solid faced quay structure or suitable supporting frame i.e. ideal in the situations where a fixed fender is not applicable such as to Ship-To-Ship (STS) operations off shore and some Ship-To-Wharf (STW)
operations and suitable for the use at a quay where the tidal range is large. Since pneumatic fenders are very easy to install, they can quickly be redeployed to wherever they are needed.
?
These pneumatic fenders are also useful as supplementary protection and for special vessels where the permanent fixed fenders may be unsuitable.
?
Manufactured as per ISO 17357 with 0.5 kg/cm2 and 0.8 kg/cm2 internal pressure, these Fenders are extensively used for ship to ship transfers at mid sea, as well as vessel to berth at dock/jetty.?
?
Major?Strengths?Of?Our?marine ?rubber ?fender:
?
1.?High?safety?level:?our?pneumatic?fenders?can?stand?the?maximum?pressure?up?to?4?times?that?of?the?operating?pressure.
?
2. ?Easy?maintenance:?our?fenders?just?need?inflation?once?every?six?months.
?
3.?Low?transportation?cost:?our?fenders?can?be?deflated?and?folded?for?transportation,?thus?saving?about?two?thirds?of?the?transportation?cost.
?
4. Long?lifespan:?it?is?guaranteed?that?our?fenders?can?be?used?for?over?10?years?under?normal?conditions.
?
?
?
marine ?rubber ?fender?Specifications and sizes :
?
The?guaranteed?energy?absorption?of?marine?rubber?fenders?are?the?energy?absorption?at?60%?deflection.?This?value?can?be?use?in?engineering?design?and?actual?operation.?Table?gives?the?sizes,?weights?and?technical?performance?of pneumatic marine rubber fenders.
?
- - - -
Nominal?size (DxL)meter | Initial?internal?pressure?Po=0.05Mpa | Initial?internal?pressure?Po=0.08Mpa |
Load (kg) | R (KN) | Energy (KJ) | Load (kg) | R (KN) | Energy (KJ) |
0.5x1.0 | 25 | 64 | 6 | 25 | 83 | 8 |
0.6x1.0 | 32 | 74 | 8 | 32 | 96 | 11 |
0.7x1.5 | 50 | 137 | 17 | 50 | 178 | 24 |
1.0x1.5 | 80 | 182 | 32 | 80 | 235 | 44 |
1.0x2.0 | 100 | 257 | 45 | 125 | 335 | 63 |
1.2x2.0 | 120 | 297 | 63 | 165 | 386 | 86 |
1.35x2.5 | 165 | 427 | 102 | 226 | 554 | 140 |
1.5x3.0 | 315 | 597 | 153 | 370 | 751 | 211 |
1.7x3.0 | 405 | 639 | 191 | 436 | 830 | 263 |
2.0x3.5 | 590 | 875 | 308 | 632 | 1138 | 424 |
2.5x4.0 | 1050 | 1381 | 663 | 1110 | 1815 | 925 |
2.5x5.5 | 1333 | 2019 | 943 | 1410 | 2653 | 1317 |
3.0x5.0 | 1880 | 2104 | 1210 | 2155 | 2700 | 1571 |
3.0x6.0 | 2160 | 2583 | 1485 | 2470 | 3292 | 1888 |
3.3x4.5 | 2020 | 1884 | 1175 | 2300 | 2476 | 1640 |
3.3x6.0 | 2300 | 2783 | 1675 | 2600 | 3652 | 2338 |
3.3x6.5 | 2700 | 3015 | 1814 | 3080 | 3961 | 2532 |
- - - -
?
?
?
Floating Pneumatic Marine?Rubber Fender Maintenances?
1)Periodically check the pneumatic fender against damages and pressure variation and replace the air valve core once every six months.?
2) If the pneumatic fender ties with wire rope, the wire rope must be cased with rubber sleeves to avoid the fender stabbed by wire.?
3) There must be none of sharp or projecting thing on the surface in which the pneumatic fenders contact to avoid the fender from being damaged.?
?
Floating Marine?Pneumatic Rubber Fender Storage?
An unused fender can be well-maintained for a long time if stored in the clear, dry and airy place. The store must be cool, dark and with good ventilation. The pneumatic fenders must be kept away from hot condition. Keep them away from acid, alkali, grease and organic solution. Avoid putting heavy loads on the pneumatic fenders. Keep all fenders individually spaced.?
Please keep the pneumatic fenders inflated when storage,we don& acute;t suggest to keep the fenders deflated for more than two months.?
?
?
Our?marine ?rubber ?fender
NANHAI AIRBAG series Pneumatic Fenders are manufactured as per ISO 17357 with 0.5 kg/cm2 and 0.8 kg/cm2 internal pressure (other internal pressures are available on request). These Fenders are extensively used for ship to ship transfers at mid sea, double banking operations as well as vessel to berth transfers at dock/jetty. These Fenders offer excellent energy absorption characteristics and do have a Linear load deflection characteristic.
?
The special property of Pneumatic Fenders makes it suitable for Liquid cargo Vessels and Defense Vessels with very sensitive equipment. These Fenders offer excellent energy absorption characteristic and do have a Linear load deflection characteristic. They are very easy to install, remove and handle for various applications.
?
?
?
?
Any questions please feel free to contact me at any time.?
Website:www.airbag.cc ?www.nanhaiairbag.com?
Tell:+86 0531 58775198
?
Email:sales@airbag.cc
?
?
?
?
Read More
Shandong Nanhai Airbag Engineering Co., Ltd.
Pneumatic Fender,Yokohama Fender,Ship Launching Airbag
Address: 59 Gongye Road South, Room 403, Building No. 2, China Railway Fortune Center, Jinan City, Shandong Province, China,
Jinan, Shandong
China, 250000
Tel: 86-531-58775198
Fax: 86-531-58775188
