Sports & Entertainment Product Agents

Share us

Pneumatic yokohama marine rubber fender for berthing and mooring

3.3 D X 4.5 L

Description

?

?

Pneumatic yokohama marine rubber ?fender for berthing and mooring?

?

?

marine ?rubber ?fender?Description:

?

Pneumatic fenders are ideal for permanent & semi-permanent port applications where there is a solid faced quay structure or suitable supporting frame i.e. ideal in the situations where a fixed fender is not applicable such as to Ship-To-Ship (STS) operations off shore and some Ship-To-Wharf (STW) operations and suitable for the use at a quay where the tidal range is large. Since pneumatic fenders are very easy to install, they can quickly be redeployed to wherever they are needed. These pneumatic fenders are also useful as supplementary protection and for special vessels where the permanent fixed fenders may be unsuitable.

?

Manufactured as per ISO 17357 with 0.5 kg/cm2 and 0.8 kg/cm2 internal pressure, these Fenders are extensively used for ship to ship transfers at mid sea, as well as vessel to berth at dock/jetty.?

?

marine ?rubber ?fender?Specifications and sizes :

?

The?guaranteed?energy?absorption?of?marine?rubber?fenders?are?the?energy?absorption?at?60%?deflection.?This?value?can?be?use?in?engineering?design?and?actual?operation.?Table?gives?the?sizes,?weights?and?technical?performance?of pneumatic marine rubber fenders.

?

- - - -
Nominal?size (DxL)meter | Initial?internal?pressure?Po=0.05Mpa | Initial?internal?pressure?Po=0.08Mpa |
Load (kg) | R (KN) | Energy (KJ) | Load (kg) | R (KN) | Energy (KJ) |
0.5x1.0 | 25 | 64 | 6 | 25 | 83 | 8 |
0.6x1.0 | 32 | 74 | 8 | 32 | 96 | 11 |
0.7x1.5 | 50 | 137 | 17 | 50 | 178 | 24 |
1.0x1.5 | 80 | 182 | 32 | 80 | 235 | 44 |
1.0x2.0 | 100 | 257 | 45 | 125 | 335 | 63 |
1.2x2.0 | 120 | 297 | 63 | 165 | 386 | 86 |
1.35x2.5 | 165 | 427 | 102 | 226 | 554 | 140 |
1.5x3.0 | 315 | 597 | 153 | 370 | 751 | 211 |
1.7x3.0 | 405 | 639 | 191 | 436 | 830 | 263 |
2.0x3.5 | 590 | 875 | 308 | 632 | 1138 | 424 |
2.5x4.0 | 1050 | 1381 | 663 | 1110 | 1815 | 925 |
2.5x5.5 | 1333 | 2019 | 943 | 1410 | 2653 | 1317 |
3.0x5.0 | 1880 | 2104 | 1210 | 2155 | 2700 | 1571 |
3.0x6.0 | 2160 | 2583 | 1485 | 2470 | 3292 | 1888 |
3.3x4.5 | 2020 | 1884 | 1175 | 2300 | 2476 | 1640 |
3.3x6.0 | 2300 | 2783 | 1675 | 2600 | 3652 | 2338 |
3.3x6.5 | 2700 | 3015 | 1814 | 3080 | 3961 | 2532 |
- - - -

?

?

?

Storage?for?marine ?rubber ?fender

?

*When?not?using?for?a?long?time,wash?the?surface?of?the?fender,dry?up?and?fill?in?sufficient?right?amount?of?compressed?air?to?lay?them?in?a?cool.dry?and?well-ventilated?place.

*The?storage?place?of?pneumatic?rubber?fender?should?be?far?away?from?hear?source

*Try?to?keep?fender?away?from?acid,alkali,grease?and?organic?solvents

*When?not?applying?the?fenders,the?pneumatic?rubber?fender?can’t?be?piled?up?and?heavy?items?can’t?be?piled?on?the?fender

?

Major?Strengths?Of?Our?marine ?rubber ?fender:

?

1.?High?safety?level:?our?pneumatic?fenders?can?stand?the?maximum?pressure?up?to?4?times?that?of?the?operating?pressure.

?

2. ?Easy?maintenance:?our?fenders?just?need?inflation?once?every?six?months.

?

3.Low?transportation?cost:?our?fenders?can?be?deflated?and?folded?for?transportation,?thus?saving?about?two?thirds?of?the?transportation?cost.

?

4. Long?lifespan:?it?is?guaranteed?that?our?fenders?can?be?used?for?over?10?years?under?normal?conditions.

?

Our?marine ?rubber ?fender

?

Founded in 2003, Shandong Nanhai Airbag Engineering Co., Ltd. (“Nanhai”) is a full-service provider of airbags and pneumatic fenders, covering R&D, manufacture and distribution. Our airbag products are used for ship launching, buoyancy, and heavy lifting and moving with remarkable advantages over traditional steel-based methods.


Having passed the QMS certifications of BV and ISO 9001, our products have been exported to more than 40 countries and regions around the world, being widely used in the fields of ports, ocean engineering, ships and tunnels. Last but not the least, Nanhai is a qualified vendor of airbags and related products to China National Offshore Oil Corporation (“CNOOC”).

?

?

?

?

All our pneumatic marine?rubber fenders are manufactured and tested in accordance with ISO17357:2002.

?

Any questions please feel free to contact me at any time.?


Website:www.airbag.cc ?www.nanhaiairbag.com?


Tell:+86 0531 58775198

?

Email:sales@airbag.cc

?

?

?

?

cheap prodocuts, china suppliers,

Read More

Previous

Sling type floating pneumatic rubber marine fender ship approved ISO 17357...

Previous

Marine inflatable floating rubber pneumatic yokohama fender Passed ISO 17357...

Shandong Nanhai Airbag Engineering Co., Ltd.

Pneumatic Fender,Yokohama Fender,Ship Launching Airbag

Address: 59 Gongye Road South, Room 403, Building No. 2, China Railway Fortune Center, Jinan City, Shandong Province, China,
Jinan, Shandong
China, 250000

Tel: 86-531-58775198
Fax: 86-531-58775188

H5响应式定制设计
26种语言,SEO营销型网站


H5/响应式/营销型企业网站; 26种语言扩展;
覆盖: 英文、法语、德语、西班牙语、葡萄牙语、俄语、阿拉伯语、波斯语、日语、韩语
了解更多