Pneumatic Components

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Pneumatic Components

Share us

PVC PP PE Single Wall Corrugated Plastic Pipe Production Line Extrusion Machinery

SJS

Send Inquiry

Description

Plastic PVC PP PE Single Wall Corrugated Pipe Production Line / Making Machine / Extruder

?

Introduction of Plastic PVC PP PE Single Wall Corrugated Pipe Production Line / Making Machine / Extruder

?

It consists of automatic feeding system/single screw extruder/die head/forming machine /winder. It is mainly produce PE/PP/PVC single corrugated tube. The PE/PP/PVC single corrugated tube is mainly used in the golf course, playgrounds as light load of drainage, floods; Interior decoration cable casing; Automotive wire casing; The washing machine, air conditioner drain; Prestressed concrete special tube, etc.
?

Features of PE/PP/PVC Single Wall Pipe / Tubes:


1). It has good flexibility: to resist distortion, bending good performance Acid, lubricating oil, cooling fluid, etc
2). Exterior luster, friction resistance
3). Carrying capacity is strong, can bear the weight of the foot, doesn& acute;t break, deformation, can quickly recover, and itself without any damage
?

Features of?Plastic PVC PP PE Single Wall Corrugated Pipe Production Line / Making Machine / Extruder:

?

1). Adopt Electric-magnetic heater which can save 40% to 60% electric energy .
2). All electric parts ( breaker/relay/ inverter ) is SIEMENS/SCHNEIDER/OMRON
3). PLC control and simple operation?
4). The forming machine has 38 pairs to 72 pairs forming block.
5). Production speed is 15m/min to 25m/min.


Technical Parameter of?Plastic PVC PP PE Single Wall Corrugated Pipe Production Line / Making Machine / Extruder:

?

- - - -
pipe diameter(mm) | 4-10 | 9-32 | 16-63 |
Extruder | SJ-30 | SJ-45 | SJ-65 |
L/D | 30:1 | 30:1 | 30:1 |
Max output(kg/h) | 10 | 40 | 80 |
Main motor power(kw) | 4 | 11 | 18.5 |
Corrugator power(kw) | 1.1 | 1.5 | 2.2 |
Mold Quantity | 40 | 44 | 44 |
Cooling type | water and air cooling | water and air cooling | water and air cooling |
Line speed(m/min) | 6-10 | 8-12 | 8-15 |
Counting type | sense counting | sense counting | sense counting |
Winding type | Motor-driven | Motor-driven | Motor-driven
? |
- - - -

?



Technology?and?Service:
?
1.Seller?supply?full?set?of?technical?document,?cutter?and?other?full?document?(write?in?English)?for?the?extrusion
?machine.
2. Seller?supply?training?for?buyer& acute;s?staff?until?buyer?can?produce?the?eligible?production?independently.
3. Seller?is?responsible?for?installing,?testing,?adjusting?and?debugging?the?machines?in?buyer& acute;s?factory.
4. Buyer?should?pay?the?expense?for?our?engineers?including?for?our?engineer?including?round-?way?tickets,?
inland?traffic,?lodging?and?boarding?fee?when?the?machine?is?installed,?tested?and?maintained.
5. Seller?will?go?to?install?machines?after?the?machine?is?arrived?at?buyer?and?buyer?will?have?prepared?all?
conditions?(including?power,?water,?compress?air,?tools?and?materials?for?producing?pipe,?etc)?for?installing?and
?testing?these?machines.Buyer?should?pay?60USD/day.
6. When?installing,?people?of?both?sides?cooperate?well?and?carefully,?buyer?supplies?convenient?working?
condition,?any?problem,?should?discuss?peacefully?and?kindly.
7. Buyer?supply?proper?working?tools,?equipments?and?other?conditions.
8. The?expense?including?the?accommodation?and?materials?of?the?trial-run?the?machine?for?testing?and?other?
expenses(electric,?water,?air?and?worker)?will?be?on?seller& acute;s?account,??if?the?buyer?or?their?representatives?do?
the?inspection?of?the?machines?before?shipment.
9. Guarantee?period:14?months?after?shipment?(the?date?of?B/L)

Read More