Hardware & Tools
Description
Diamond knife sharpener
1.Coarse & fine diamond stones in one
2.Oval hole,collect the metal chippings
3Clear plastic cover
Diamond Conbination Bench Stone T0831D uses efficient monocrystalline abrasive for quickly sharpening and honing all edge tools.
specifications:
1. Excellent sharpening performance
2. Double side diamond design as 360Grit for coarse sharpen & 600Grit for fine honing
3. Clear plastic cover protects the stone, Molded Plastic Base with Non-Slip Feet for Safety
4. Oval hole design to collect and hold metal chippings
using scope:
this diamond knife sharpener is widely used to sharpening ktichen knives, garden knives, tools, outdoor knives , or other tools
Using Instruction:
1. Place the stone on a non-slip worktop and make certain that the surface is flat.
2. The way of sharpening is decided by the degree of blunt tool.
Step one, for coarse sharpening: Used to repair badly damaged blade, suitable for a blunter knife.
Start by using the coarse 360 grit of the stone, move the blade back and forth over the stone at an angle of 10 - 30 ° by using light pressure.
Generally we advise you to use it with coarse stage for half a year, also depends on the specific situation.
Step two, for fine honing; it is a necessary step for the elimination of burr on the knife, and makes the blade smooth and bright
Using the 600 grit of the stone, move the blade back and forth over the stone at an angle of 10 - 30 ° by using gentle pressure.
General speaking, use it once a week to keep your blade sharp.
3. Clean the knife with the water or wiper and dry it after use; Clean the knife sharpener with non-abrasive brush.
2)Sharpen the tools
Oval hole design to collect and hold metal chippings
Read More
Taidea Tech. (Zhongshan) Co., Ltd.
knife sharpener锛実arden tools sharpener
Address: Area B, Third Floor, Building 2, No. 8, Qianjin 2nd Road, Tanzhou Town, Zhongshan, Guangdong, China (Mainland),
zhongshan, guangdong
China, 528467
Tel: 0086-0760-86285856
Fax: 0086-0760-86983769
