Lights & Lighting

1. Home
2. Products
3. Lights & Lighting
4. Lights & Lighting

Share us

Aluminum LED Street Light

No.1-1

Send Inquiry

Description

Technical Requirements on LED Street Light and Lamps（1）Protecting class of LED street light cover: more than IP65（2）LED street light is made of aluminum alloy material with high quality and the lamp surface is sprayed to bear mechanical stress and the corrosion of salt mist,Website:http://www.streetlight-china.com, vehicle exhaust and cleaners.（3）LED lamps must have been verified by Guangdong LED street lamps testing organization with benchmarking evaluation system and testing report should be provided. (The LED lamps should be from the same manufacturer, whose LED products have been adopted by bender in this bid)（4）Good batwing light mating design; catoptric system adopts design of stereo light source or lens light guiding （5）The working temperature of LED street light should meet -20℃～+50℃ and it& acute;s suitable for Guangdong area. Meanwhile, it should meet other special requirements in particular scenes, such as ambient temperature, humidity and corrosivity.（6）LED street light AC working voltage range: ?85V～265V (LED lamps still can work normally in this voltage range)（7）Power factor of LED lamp: ≥0.95, driving power efficiency of lamps ≥90%（8）LED street light should have surge suppression property (thunder proof) and the input end has over-voltage protection. When the voltage goes back to normal, it can return to work.（9）The elevation angle of lamp must have the adjusting function to ensure the maximum illumination on road. （10） The lamp power of LED light must be automatically adjusted in the time after midnight.Technical Requirements on LED lighting source（1）It adopts LED chips with high luminous efficiency which is over 110Lm/w, no ghosting and low degradation. Manufacturer& acute;s CO copy is supplied and attached to the bid documents and it should be provided together if there is original CO.（2）LED light source chips are required to adopt international brands (CREE U.S.A; Bridgelux; Osram Germany; Philips Netherlands) as well as packing technique of low thermal resis

Read More