Power Distribution Equipment

1. Home
2. Products
3. Electronic & Electrical
4. Power Distribution Equipment

Share us

400KV Tension tower

MGT-TT400-001

Send Inquiry

Description

400KV TENSION STEEL TOWER FOR POWER TRANSMISSION
A transmission tower is a tall structure, usually a steel lattice tower, used to support an overhead power line. They are used in high-voltage AC and DC systems, and come in a wide variety of shapes and sizes.
Tension tower was located between every three or four suspension tower to pull the conductors which are re-tied in tension tower insulators.
MEGATRO provide the 400KV tension tower for our esteemed clients. The Tower Line work involves Survey, check survey, and span calculations essential for tower extensions. Moreover, Tower designs and prototype approval is done. In material choice, the steel material must be high tensile with strength, solid, wind resistance well. In general, we adopt more ASTM A572 GR50, GR65, ST52, S355J0, S355JR, Fe510, Q420, Q460, and equivalent materials.
MEGATRO fabricates every structure tension tower by solid steel legs and angle iron cross members & pipes. Structures can reach heights up to 200 meter. MEGATRO is one of the few manufactures who assemble a face of every tower section. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies.

After fabrication all 400KV tension tower are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers.

MEGATRO& acute;s 400KV tension tower systems can accommodate a variety of cross-arm. MEGATRO also offers a wide variety of accessories and mounts.

Read More