Non-metallic Mineral Products
Constant Power Control 350bar Viton Axial Hydraulic Piston Pump , 80 cc Displacement CY Series
80YCY14-1B,160YCY14-1B, 250YCY14-1B
Description
?
Constant Power Control Axial Hydraulic Piston Pump , 80 cc Displacement CY Series
?
?
Quick details
Constant Power Control Axial Piston Pump CY Series
?Rated pressure 315 bar
Peak pressure 400bar
displacement is 80 cc
Keyed shaft, ?single pump
?
It is Axial piston pump, Rated pressure 315 bar, Peak pressure 400bar, displacement is 80 cc, Constant power control, Clockwise Rotation, Perbunan seals, Keyed shaft, ?single pump.
?
?
Specifications:
- - - -
Dimension? model | 10(16)YCY | 25(40)YCY | 63(80)YCY | 160YCY | 250(400)YCY |
A | φ125 | φ150 | φ190 | φ240 | φ280 |
B(f9) | φ75 | φ100 | φ120 | φ150 | φ180 |
C | 27.5 | 32.5 | 42.8 | 59 | 63.9 |
D(h6) | φ25 | φ30 | φ40 | φ55 | φ60 |
E | 4 | 4 | 4 | 4 | 5 |
F | 30 | 45 | 50 | 100 | 100 |
G | 40 | 52 | 60 | 106 | 110 |
H | 41 | 54 | 62 | 110 | 112 |
I | 86 | 104 | 122 | 180 | 212 |
J | 109 | 134 | 157 | 230 | 272(277) |
K | 194 | 246 | 300 | 411 | 492(502) |
L | 71 | 83 | 108 | 141 | 170 |
M | M14×1.5 | M14×1.5 | M18×1.5 | M22×1.5 | M22×1.5 |
N | M10 | M10 | M12 | M16 | M20 |
P | ? | ? | ? | M16 | M20 |
Q(h9) | 8 | 8 | 12 | 16 | 18 |
R | φ100 | φ125 | φ155 | φ198 | φ230 |
S | 142 | 172 | 200 | 340 | 420 |
T | M22×1.5 | M33(M42)×2 | M42(M48)×2 | φ55 | φ64(φ66) |
U | ? | ? | ? | φ64 | φ76 |
X | 294 | 362 | 439 | 595 | 690(700) |
Y | 258 | 317 | 390 | 533 | 629(639) |
Z | 50 | 66 | 74 | 100 | 100 |
EE | 100 | 120 | 140 | 173 | 210 |
FF | 288 | 351 | 400 | 448 | 516 |
- - - -
?
?
?
Parameter
?
?
- - - -
Operating pressure range | Pressure at port B |
~ inlet | Nominal pressure PN----------------280bar |
? | Peak pressure PMAX-----------------------350bar |
Absolute pressure at port S | Clearance work pressure (10% cycle)---------315bar |
??P abs min------------------------0.8bar | Applications with intermittent operating pressures up to |
? P abs max------------------------30bar | 215 bar at 10% duty are permitted . |
- - - -
???? Case drain pressure
Maximum permissible pressure of leakage fluid (at port L,L1):Maximum0.5 bar higher than
The inlet pressure at port S,but no higher than 2 bar absolute pressure.
?
?
Applications:
Hydraulic system. Boats Hydraulic system. Pressure Machine, Cut machine, Package Machine
?
?
?
Description:
- - - -
Ordering Code | Detail |
HA10V(S) | Model? Variable pump,Swashplate? design? | Rated pressure 280bar? | Peak pressure 350bar | |
O | Mode of operation Pump,Circuit??? | | | |
28 | Displacement 18 . 28 . 45 . 71 . 100 . 140(ml/r) | | | |
DR | Two point ,direct control??? ,DRG---?????? Remote pressure control | Pressure control,Pressure and flow control | DFR1? Pressure and flow control ,Orifice in X-channel closed | Pressure . flow and torque control? |
/ | | | | |
31 | Series:? 31 Series | | | |
R | ?Direction of rotation? R---? Clockwise | ???????????????????????????????????????????????????????????????????????? L---? Anti-clockwise | | |
- | | | | |
P | P-- Perbunan? | Seals V--? Viton | | |
S | Type the shaft:P--- Metric parallel with key | ?S-- SAE splined | ?? K-- SAE parallel with key | U-- SAE splined,reduced dia. |
C | Mounting flange:C--- SAE 2-hole? | D--- SAE 4-hole | A- ISO 2-hole | ? B- ISO 4-hole |
62 | Port form:11—Back SAE, Port for?SAE flage rear,fixing thread metric | service Lines? 12---Both sides SAE,SAE flage on opposite side,fixing thread UNC | ? 61---? SAE,UNC Screw thread,? SAE flage rear ,fixing thread UNC | 62---Both sides SAE,UNC Screw thread, SAE flage on opposite side,fixing thread UNC |
NOO | Thru-form:N00- Nowhere shaft? | ?without through drive | ? K**--- Thru | with through drive
? |
- - - -
?
Advantage:
Good quality, Competitive price and quick delivery.
Low noise, Small Volume
Read More
Jiangsu Hengyuan Hydraulic Co.,Ltd
Hydraulic Axial Piston Pump,Axial Piston Pumps,Swash Plate Axial Piston Pump
Address: Xin鈥檃n Industry park,
nantong, Jiangsu
China, 226200
Tel: 86-513-83203101
Fax: 86-513-83742220
