Power Transmission Equipment

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Power Transmission Equipment

Share us

Hydraulic Pressure Silo Forming Machine / Cold Roll Former Machine 1.5-2 mm Material Thickness

ZBR-S-1066

Send Inquiry

Description

Hydraulic Pressure Silo Forming Machine / Cold Roll Former Machine 1.5-2 mm Material Thickness?

?

Thickness 1.5-2mm Steel Silo Corrugated Sheet Roll Forming Machine
Steel Silo Technique Data
1. Material: galvanized coils
2. Material Thickness: 1.5-2mm
3. Forming Station: 18
4. Rolling Machine Working Speed: 12-15m/min
5. Drive System: gear box drive
6. Main motor power: 90Kw
7. Punching mold: 3 sets of punching dies at one time
8. Cutting: hydraulic cutting
9. Hydraulic Power: 55Kw, the pressure 25-30Mpa
10. Total Power: 130Kw
11. Out Table: lift auto stacker

Steel Silo Machine Components

- - - -
S.N. | Machine List | Qty |
1. | 5 ton hydraulic decoiler | 1 set |
2. | Feeding&leveling device | 1 set |
3. | Gear box drive system | 1 set |
4. | Main forming machine | 1 set |
5. | Curving device | 1 set |
6. | Hydraulic cutting device | 1 set |
7. | Auto stacker 6 meters | 1 set |
8. | PLC control system | 1 set |
9. | Hydraulic station | 1 set |
- - - -


Advantage for Steel Silo
1. Reasonable Price
2. High Quality
3. 12 Months Warranty
4. More Than 10 Years Experience
5. Durable
6. Reliable

Working Flow of Steel Silo
Decoiler-Feedingwithguide-Straighteningdevice-Mainrollformingmachine-Curving-Outputtable

Main Specifications

- - - -
Coil Material | Thickness | 2.0-6.0mm |
Coil width | Depend on customer& acute;s requires |
Yield Strength | 250-350Mpa |
Material | GI. Carbon Steel |
Decoiler / Uncoiler | Coil Width | Max. 1500mm |
I.D | 510-610mm |
O.D | Max. 1300mm |
Capability | Max. 10 Tons |
Decoiler type | Manual / Hydraulic/Automatic |
Feeding & Leveling | Pinch feeding | 3 Units ( 6 Rollers ) |
Leveling | 7 Rollers ( Upper 3 Rollers, Bottom 4 Rollers ) |
Punching device | Punching motion | Hydraulic Punching, Post-punching |
Punching dies | Cr12 Mov Steel, HRC58-62 |
Punching station | 1-2 Unites ( depend on hole patterns ) |
Punching in longitude controlled by PLC, punching at horizontal adjusted by manual hand wheel. |
Cutting device | Cutting motion | Hydraulic Cutting, post-Cutting ( cutting sheet after forming ) |
Cutting blades | Cr12Mov with heat treatment HRC58-62 |
Length Measuring | Automatic length measuring by encoder & PLC. |
Cutting Tolerance | +/-1.5mm(per 3m) |
Roll Forming Machine | Forming Stations | 17 Stations |
Rectifying | 1 unit |
Roller material | GCr15 steel, heat treatment |
Diameter of shaft | 80mm |
Shaft material | High grade 45# steel |
Drive type | Chains |
Forming speed | 0-15m/min |
Main power | 22KW(11kw*2) |
Servo motor | 2 Units |
Electrical control | PLC | PANASONIC Brand or Custom-made |
Inverter | YASKAWA Brand or Custom-made |
Touch screen | MCGS Brand or Custom-made |
Operation type | Touch screen & Button |
Hydraulic Station | Hydraulic station | Famous Chinese brand |
Hydraulic power | 30KW |
Runout Table | Table type | Simple non-power type |
Function | To support the finished panels |
TOTAL WEIGHT | ? | APRRO 25 TONS

? |
- - - -

?

Read More