General Parts

1. Home
2. Products
3. Machinery & Industrial Supplies
4. General Parts

Share us

Roll to Roll Laser Die Cutting Machine for Label Stickers LC-350

AIA-1

Send Inquiry

Description

Roll to Roll Laser Die Cutting Machine for Label Stickers LC-350
?

Specifications
?

- - - -
A. | Main Technical Parameters |
? | Working Area | 350mm X 350mm? (Width 350mm, Length ∞) |
Speed reference | 20m/min - 275Watt
60m/min - 500Watt |
Cooling system | Constant temperature water chiller |
Exhaust/filter | 4 stage filtration and exhaust |
Consumption | 5KW |
Power supply | 275Watt - 220V? single phase? 50Hz / 60Hz
500Watt - 380V? three phase? 50Hz / 60Hz |
Dimension | 3200mm(L) * 1100mm(W) * 1700mm(H) |
Weight | 1500Kg |
B. | Main Configuration |
1. | Unwinder |
Maximum Web Diameter | 600mm |
Maximum Web Width | 370mm |
Core | 3 inch |
Pneumatic Expanding Shaft | 3 inch |
Tension Control | MEROBEL DGT-300 France |
Splice Table | Automatic Clamp |
Web Guide | MAXCESS FIFE-500? USA |
2. | Laser System |
Laser Source | Sealed CO2 RF Metal laser tube |
Laser Power | 275W / 500W |
Laser Wavelength | 10.6 micron |
Laser Beam Positioning | Galvanometer |
Laser Spot Size | 210 microns |
3. | Matrix Removal |
Back side slitting | ? |
Matrix Rewinding | ? |
Pneumatic Expanding Shaft | 3 inch |
4. | Rewinder |
Tension Control | automatic |
Pneumatic Expanding Shaft | 3 inch |
5. | Options | Varnishing unit with UV dryer |
Laminating unit |
Slitting unit |
* Note: As products are constantly updated, please contact us for latest specifications. |
- - - -

?

Description
?
Roll to Roll Label Laser Cutting Machine Description
?
??Specially developed for cutting, punching and marking for adhesive label, stickers, films and other roll materials.
?
??No mold, successfully replaced traditional die-cutting, without cutting graphical restrictions. High cutting speed, short processing cycle.
?
??Color sensors to locate the cutting graphics. Compared with camera positioning, laser die-cutting is higher precision. After-focusing optional principle, enable laser spot more slim and better cutting results.
?
??High speed flying Galvanometer cutting, continuous and automatic cutting rolls of printed stickers and adhesive labels.
?
??Automatic position correcting system makes auto feeding and rewinding more precise, to ensure die-cutting accuracy. Feeding speed up to 60m/min, to ensure high efficiency of cutting.
?

Applications
?
?Roll Labels/Film/Sticker Laser Cutting Application
?
? Sticker labels kiss cutting
? Printed label, paper, film cutting
? Film surface etching
? Polyesters cutting
? Polyimide cutting
? Nylon cutting
? Polymeric film cutting
? Paper cutting engraving
? Film drilling / scoring

?

Materials

?

? Glossy paper
? matt paper
? paper, cardboard
? polyester
? polypropylene
? polyimide
? polymeric film
? PET film
? synthetic, etc.
?

Competitive Advantage
?
Laser UNIQUE Advantages for Roll to Roll Sticker Labels Cutting
?

- - - -
- Stability and Reliability |
Sealed Co2 RF laser source, the quality of cut is always perfect and constant over time with low cost of maintenance. |
- High Speed |
The Galvanometric system allows the bean to move very quickly, perfectly focalized on the entire working area. |
- High Precision |
The innovative Label Positioning System controls the web position on the X and Y axis. This device guarantees a cutting precision within 20 micron even cutting labels with an irregular gap. |
-?Extremely Versatile |
The machine is very appreciated by label producers as it can create a huge variety of labels, in a single high speed process. |
- Suitable to work a wide range of material |
Glossy paper, matt paper, cardboard, polyester, polypropylene, polyimide, polymeric film synthetic, etc. |
- Suitable for different kinds of work |
Die cutting any kind of shape – cutting and kiss cutting – perforating – micro perforating – engraving |
- No limitation of cutting design |
You can cut different design with laser machine, no matter the shape or the size |
-Minimal Material Waste |
Laser cutting is non-contact heat process. tt is with slim laser beam. It will not cause any waste about your materials. |
-Save your production cost & maintenance cost |
Laser cutting no need mold/knife, no need to make mold for different design. Laser cut will save you a lot of production cost; and laser machine has long using life, without mold replacement cost. |
- - - -

?

Sample Photos

Read More