Coatings
Description
Floating agent KC4050
Floating agent KC4050 is a kind of floating agent with the element acrylic acid ester, it can be applied to all kinds of PC system to produce the hammer pattern or wrinkle pattern.
1.Technical Parameters:
Appearance :white powder
Content: ≥98.5%
Volatile matter: ≤0.5%
2.Application and Performance:
★When producing, the floating agent KC1210 should be by final mix method, it can not pre-mix or extrude with other materials, otherwise, it wont obtain the pattern, the recommended dosage is about 0.1-0.8%, then cool mixed with powder enough and uniformity, but the exact dosage require to be confirmed after testing.
★ As usually, its not necessary to add leveling agent, gloss enhancing agent or benzoin commonly when using it, so as to save the powder coating production cost.
★ In order to adjust the pattern effect, it has to adjust the weight and type of filler in PC formulation, more filler dosage makes small & shallow pattern, fewer filler dosage bring big & dark pattern and easy to reveal the panel.
★ More dosage leads small texture pattern, by contraries, fewer dosage makes large texture pattern.
★ When using this products, mixed and extruded all materials except floating agent KC1210 of powder coating formulation, the extruded technology is consistent with the powder, then well-mixed with KC1210 after pulverizing, it had better filter the powder once or twice in vibrating screen.
3.Storage:
Store in a cool and dry place to avoid contacting other chemical products, keep away from heat and fire, sealed storage after each use.
4.Package:
The product is packed in polyethylene-lined composite kraft bag, the net weight is 25 kgs per bag.
Read More
Anhui Kingcham Chemical Technology Co.,Ltd.
matting agent,defoamer,texture agent,charge regulator,curing agent,Flow and Leveling Agent etc. powder coating additives
Address: Building 1,He An homeland,South of Jinzhai Road 1066th,Hefei,Anhui,China. ,
Hefei, Anhui
China, 230601
Tel: 0086-551-63830671
Fax: 0086-551-63830871
