Air-compressing & Air-separation
T38 / T51 shank DTH Drilling Rig , 25m Depth Full Pneumatic Top Hammer Drill Rigs
DRC300
Description
T38 / T51 shank DTH Drilling Rig ,25m Depth Full Pneumatic Top Hammer Drill Rigs?
?
DRC300 Full Pneumatic Top hammer drilling rig with long service life rock drifter for T38,T51 shank
?
Introduction
DRC300 crawler pneumatic top hammer drilling rig powered by air compressor, the Top hammer drilling rig is equipped with a high power pneumatic rock drifter, the heavy-duty drill arm and the main parts of this rotary drill rig are all imported from famous international brands, which guarantee the reliable quality of the drifter rock drilling rig, especially realize much less energy consumption of rolling fraction than that of sliding fraction and make the wear of sliding framework be lower.
Characteristics
The chassis is driven by highly-efficient pneumatic motor with powerful traction. Each track is driven independently by air motor with enclosed gear drive, the gradeability arrives 35° with a compressor, or 50° alone.
Hydraulic track oscillation is more suitable for positioning drilling machine during drilling..
The carriage with rollers provides for minimal wear to the drill guide.
The special compensation device makes a full production of drill rod threads.
The Hydraulic auxiliary functions are easy and efficient for guide extension, boom swing, boom lift, guide tilt and guide dump.
Competitive in price,low cost of maintain.
Optional dust in wet and dry.
?
Specification
- - - -
1 | Rock Hardness | F=6-20 |
2 | Hole Diameter | mm | Φ50-80 |
3 | Rod Length | m | 3.66 |
4 | Rod | | R32,R38 |
ROCK DRIFTER |
5 | Weight without Shank rod | kg | 180 |
6 | Length without Shank rod | mm | 1020 |
7 | Cylinder diameter | mm | 130 |
8 | Postion Stroke | mm | 80 |
9 | Air consumption | m3/min | ?Approx.16 |
10 | Main air hose connection | mm | 50 |
DIMENSION&WEIGHT |
11 | Weight | kg | 5100 |
12 | Overall length | mm | 5900 |
13 | Overall width | mm | 2210 |
14 | Height | mm | 1470 |
15 | Track width | mm | 2200 |
16 | Ground clearance | mm | 280 |
CRAWLER TRACTION | |
17 | Ground pressure | kg/cm2 | 0.45 |
18 | Traveling speed | km/h | 3 |
19 | Gradeability | ° | 35 |
20 | Oscillating angle | ° | 15 |
FEEDING SYSTEM |
21 | ?Max. Feed force | KN | 30 |
22 | ?Max. Lifting force | KN | 30 |
23 | Max. Feed Speed | M/min | 15 |
24 | ?Max. Lifting Speed | M/min | 15 |
HYDRAULIC SYSTEM |
25 | Max swing of guide | Lift50° Right35° |
26 | Max swing of boom | Lift 45°?? Right45° |
27 | Max dump of guide | 180° |
28 | Max dump of boom | Up 60°???? Down19° |
29 | Max horizontaldrilling | 3.38m |
30 | Propulsive Force | 13620N |
31 | Pushing Power | 3.36kw |
- - - -
?
Picture
Read More
Xuanhua Jinke Drilling Machinery Co., Ltd.
Water Well Drilling Rig,DTH Drilling Rig,Anchor Drilling Rig
Address: Xuanchi Road,Industrial Development Zone,Xuanhua,Hebei,China.,
Beijing, Beijing
China, 100000
Tel: 86-010-84673566
Fax: 86-010-57159802
