Wires, Cables & Cable Assemblies

1. Home
2. Products
3. Electronic & Electrical
4. Wires, Cables & Cable Assemblies

Share us

Digital Lead Free Soldering Station Low Frequency , Soldering Desoldering Station

M-75D

Send Inquiry

Description

?

M-75D 200°C- 480°C Knob Adjustment Stainless Steel Thermocouple Heating Core Soldering Iron Station

?

?
YMK Low Frequency Soldering Station Operating Principle:
?
YMK Low Frequency Soldering Station through electronic display board to control the heater work, so as to achieve the temperature control. The inside temperature sensor of heater detect the temperature signals into electrical signals, to the inside of the electronic display board microcomputer chip (MCU), through the analysis of the microcomputer chip processing, the output control signal control thyristor output or close the heater working power supply, so as to achieve the practical work of soldering iron temperature control.

?

Thermostat Soldering Iron used is the core (thermocouple), stainless steel heating temperature is stable, power sensor temperature sensitivity, DHS temperature accuracy + / - 1 C, all the accessory are in low cost.

?

?

YMK Constant Soldering Station Specialty:


◎ Temperature range:200°C- 480°C.
◎ Adjustable temperature control with lock/set screw.
◎ High quality resistance heating element and senor to insures rapid heat-up and recovery temperature.

◎ Temperature adjusted by simply turning the dial
◎ Soldering Iron handle are insulated and easy operate.
◎ Match 900M standard soldering tips .
◎ Wide selection of tips available for soldering SMD and through-hole connections
◎ Power input :220-240V
◎ Power Output: 75W

?

?

YMK Constant Soldering Station Materials List:

??

- - - -
Part Name | Specification | Description |

Frame | 115*108*9mm | ABS |
Lenses | 25*50*1.5mm | Plexiglass |
Konb | ∮16*19mm | ABS |
Front Panel | 110*105*1mm | Metal |
Power switch | ∮22mm,6A250VAC | Silver alloy |
Back Cover | 105*110*1mm | Metal |
Power Cord | 1.5m,6A/250V | Three- cores wire |
Aerial Socket | GX16-5P(B) | Metal |
Power transformer | RT-75 | Ring form |
PBCA | LH-001 | CEM-1 |
Grounded socket | ∮8*4mm | Alloy |
Power supply socket | 10A250VAC | Copper |
Fuse | 1A/250V | Slow solubility |
Soldering Iron | SI-75 | Resistance heater |
- - - -

?
?
Soldering Iron?Materials List:

- - - -
Part Name | Specification | Description |

Nut | M10 | Metal |
Tip protective sleeve | ∮8.5*45mm | Stainless |
Tip | ∮6*27mm | Pure Copper |
Hedging | M15*41mm | Temp. Resistance |
Heater | LH-75 | K type thermocouple |
PBCA | 13*60mm | FR-4 |
Handle | ∮20*110mm | ABS plastic |
Handle Sheath | ∮22*40mm | PVC plastic |
Wire Sheath | ∮10*40mm | PVC plastic |
Cable | 1.2m | PVC plastic |
Connector | GX16-5 | Metal |
- - - -

?

?

Read More