Others
Description
Colors: white, black, blue and green
Its Specifications: 1m*2m Thickness(δ ) : 6mm- 60mm Interval of 5
1m*1m Thickness(δ ) : 70mm- 100mm. Interval of 10
Customized: 75mm, 85mm, 95mm, 105mm, and more than 110mm
Nylon exterior is white to light yellow, uniform particles without mechanical impurities and surface moisture, particle size greater than 40 / g of particles with tiny black points number containing less than 2%, is characterized by toughness, earthquake, it has high mechanical strength and heat resistance, good impact strength, high melting point, good processing behavior, large water absorption, water absorption saturation at about 11%, or fusible phenolic acid in sulfuric acid medium and low temperature embrittlement temperature of minus 20 degrees - 30 degrees.
Nylon transparent plate PA: have good tensile strength, impact strength, rigidity, abrasion resistance, chemical resistance, surface hardness and other properties, high transmittance, optical glass and similar processing temperature of 300--315 ℃, when the molding process, the need to strictly control the barrel temperature, melt temperature is too high due to degradation products cause discoloration, the temperature is too low due to the adverse impact of the transparency and plastics products. Try to get some low mold temperature, mold temperature is high transparency due to crystallization products leaving reduced.
Read More
Hebei Huailiang Engineering Plastics Limited Company
Nylon pads, nylon sticks, nylon tube, and other nylon products
Address: On the crossing of Shidai Road and Xinxia Street, Xinhe county, Xingtai city,
shijiazhuang, hebei
China, 050000
Tel: 86-319-4788965
Fax:
