Air-compressing & Air-separation
Description
?
7.5KW Small Plastic Injection Molding Machine for caps With hydraulic system
?
1. features
?
ADJUSTMENT UNIT:
Automatic mold height adjustment save time and cost during the mould change
?
CLAMPING UNIT:
The plates are designed using FEM software,ensuring a stable and rigid clamping system.
Five point inward moving double toggle system ensures high rigidity and precision for mould clamping and also reducing stress and strain effect
?
HYDRAULIC UNIT:
The hydraulic system using the world famous pump and control valve can control the machine running precisely, ensuring the precision, reliability and durability of whole machine
?
INJECTION UNIT
Dual-pillar supporting and dual cylinder injection balance devices ensure the stress on screw balanced during injection
Special screw and barrel designs are available for processing different material requirements
?
ELECTRONICALLY CONTROLLED UNIT
High response PLC control system with frequency of 32MHZ
5-10inch LCD display ,showing independent CPU control
Master control frequency of 140hmz scan time 1 ms, The progress of fast response, high control accuracy
100-200group mold parameter storage space
Quality control management, the main process parameters and the curves shows a list of statistics
PID barrel temperature control function automatically adjusts the parameters
?
?
2. Specification
?
- - - -
? | HM-70 |
INJECTION?UNIT? | UNIT? | A | B | C |
SCREW?DIAMETER? | mm | 30 | 32 | 34 |
?SCREW?L/D?RETIO? | L/D | 23.7 | 22.2 | 20.7 |
?INJECTION?VOLUME | cm3 | 92 | 105 | 118 |
?INJECTION?WEIHGT? | g | 84 | 95 | 107 |
oz | 2.95 | 3.35 | 3.79 |
INJECTION?RATE? | cm3/?s | 70.9 | 80.7 | 91 |
?INJECTION?PRESSURE | Mpa | 244 | 215 | 190 |
CREW?SPEED | rpm | 220 |
?CLAMPING?UNIT? | ? | ? |
?CLAMPING?FORCE? | kN | 700 |
MOLD?OPEN?STROKE? | mm | 270 |
?SPACE?BETWEEN?TIE?BARS? | mm | 310×310 |
MAX.MOLD?HEIGHT? | mm | 120～350 |
??EJECTOR?STROKE? | mm | 70 |
?EJECTOR?FORCE? | kN | 38 |
OTHERS? | ? | ? |
?MAX.PUMP?PRESSURE? | Mpa | 16 |
?PUMP?MOTOR?POWER | kW | 7.5 |
HEATER?POWER | kW | 6.8 |
MACHINE?DIMENSIONS | mm | 3.9×1.1×1.7 |
OIL?TANK?CAPACITY | L | 150 |
MACHINE?WEIGHT | t | 2.5 |
- - - -
?
3.Configuration:
- - - -
COMPONENT | BRAND&ORIGINAL |
Fixed pump? | Servo |
hydraulic system |
HYDRAULIC MOTOR | INTERMOT-ITALY-CHINA | INTERMOT-ITALY-CHINA |
SERVO MOTOR CONTROLLER | / | TONGLING-CHINA |
HYD& acute; PUMP | FIXED | VICKERS-USA OR YUKEN-JAPAN | VICKERS-USA OR YUKEN-JAPAN |
GEAR PUMP | / | SUMITOMO-JAPAN |
DIRECTION VALVE | VICKERS-USA OR YUKEN-JAPAN | VICKERS-USA OR YUKEN-JAPAN |
PP VALVE | HNC-TAIWAN | / |
MOULD ADJUST MOTOR | INTERMOT-ITALY-CHINA | INTERMOT-ITALY-CHINA |
electric system |
CONTROLLER | TECHMATION-TAIWAN | TECHMATION-TAIWAN |
RELAY | SCHNEIDER-GERMANY | SCHNEIDER-GERMANY |
LINEAR TRANSDUCER | MIRAN-CHINA | MIRAN-CHINA |
LIMITED SWITCH | SCHNEIDER-GERMANY | SCHNEIDER-GERMANY |
BREAKER | SCHNEIDER-GERMANY? | LS-KOREA |
ELEC& acute;MOTOR | HUANQIU-CHINA | / |
others |
HIGH PRESSURE PIPE | GOODYEAR-USA | GOODYEAR-USA |
SEAL | Helate-England | Helate-England |
AUTO LUBRICATION | SL-CHINA | SL-CHINA |
SCREW AND BARREL | 38CrMoAlA-China | 38CrMoAlA-China |
- - - -
?
4.Platen drawing?
Read More
VAINO INTERNATIONAL LIMITED
HDPE Blow Molding Machine,Extrusion Blow Molding Machine,Automatic Blow Molding Machine
Address: Room1315,B# Ningbo Chamber Of Commerce Building,No.588 Tiantong South Road,Yinzhou District,Ningbo,China,
Ningbo, Zhejiang
China, 315000
Tel: 86-574-88054805
Fax: 86-574-88054565
