Storage Batteries & Secondary Batteries
Description
Hydraulic motor Low Noise Plastic Injection Molding Machine ?with M 780
?
Detailed Product Description
Standard configuration:
Adopt famous hydraulic components:
Yuken-Japan pump,Yuken-Japan direction valve,
Hydraulic motor for melting plastic using intermot italy-China
Back pressure valve Yuken Japan
Air switch from LG Korea
Breaker AC contactor ,single phase breaker ,three-phase breaker from Schneider france
T-slot makes the adjustment easier, compare with the screw adjustment, it has better adaptability and longer life-span
?
COMPONENT
?
- - - -
COMPONENT | BRAND&ORIGINAL | ? |
hydraulic?system | Servo |
hydraulic?motor | INTERMOT-ITALY-CHINA | ● |
servo?motor?control?system | HUICHUAN/PHASE-CHINA | ● |
hydraulic?pump | fixed?Pump | VICKERS?OR?YUKEN | / |
gear?pump | SUMITOMO-JAPAN | ● |
hydraulic?direction?valve | NORTHMAN-TAIWAN | ● |
propotional?flow?control?valve&propotiona l?pressure?control?valve | HNC-TAIWAN?FOR?BIG?MACHINE, SMALL?MACHINE?USE?DONGFENG-CHINA | / |
mould?adjust?hydraulic?motor | INTERMOT-CHINA? | ● |
hydraulic?safety?valve | NORTHMAN-TAIWAN | ?● |
electric?system | ? |
computer/controller | TECHMATION-TAIWAN | ● |
relay | SCHNEIDER-GERMANY | ● |
main?switch | LS-KOREA | ● |
linear?transducer | GEFRAN-ITALY | ● |
limited?switch | PANASONIC-JAPAN | ● |
breaker | CHENTAI-CHINA | ?● |
electric?motor | ZHONGDA-CHINA | / |
others | ? |
?High?pressure?hydraulic?pipe | GOODYEAR-USA | ● |
seals | VALQUA-JAPAN | ● |
pressure?meter | Tecsis-USA | ● |
automatic?lubrication? | SL-CHINA | ● |
screw? | JINGXING-CHINA?38CrMoAlA | ● |
- - - -
?
?
?SPECIFICATION
?
- - - -
?SPECIFICATION? | M-780 |
ITEM | A | B | C | D |
??INJECTION??UNIT | ? |
?????????SCREW??DIAMETER | mm | 85 | 90 | 100 | 110 |
??????SCREW??L/D??RATIO | L/D | 23 | 22 | 20 | 18 |
???SHOT??VOLUME(THEORETICAL) | ? | 2667 | 2990 | 3691 | 4467 |
??????????INJECTION??WEIGHT(PS) | g | 2454 | 2751 | 3396 | 4109 |
??????????INJECTION??PRESSURE | Mpa | 198 | 177 | 143 | 118 |
??????????INJECTION??RATE | g/sec | 380 | 426 | 526 | 613 |
?????????SCREW??SPEED | rpm | 135 |
CLAMPING?UNIT | ? |
?????????????CLAMP??TONNAGE | KN | 7800 |
??????????TOGGLE??STROKE | mm | 970 |
??????????MIN.MOLD??HEIGHT | mm | 400 |
??????????MAX.MOLD??HEIGHT | mm | 950 |
??????SPACE??BETWEEN??TIE??BARS | mm | 960X960 |
?????????????EJECTOR??TONNAGE | KN | 170 |
??????????EJECTOR??STROKE | mm | 280 |
?????EJECTOR??NUMBER | PC | 17 |
OTHERS | ? |
??MAX.PUMP??PRESSURE? | Mpa | 16 |
?????????HEATER??POWER | KW | 47 |
???PUMP?MOTOR??POWER | KW | 22+37 |
?????????OIL??TANK?CUBAGE | L | 1200 |
?????????MACHINE??DIMENSION(LxWxH) | M | 98X2.4X2.7 |
??????????MACHINE??WEIGHT | T | 31 |
- - - -
?
Selling?points
?
Better molding stability
Compared with conventional injection molding machines , repeatability is greatly improved to servo motor closeloop control.
?
More?fast?cycle
valve?panel?design?in?bigger?hole?with?bigger?oil?pipe.Oil?go?though?the?valve?more?fast?flow?and?the?Machine?action?more?goes?more?faster?in?mould?open?and?ejector?process.?
?
Mould?thickness?fully-automatic?adjustment?by?sensor,wheel?and?moto,more?accurate
?
Install?screw?rotation?speed?sensor?,can?see?the?real?material?charging?status?in?the?controller.
?
High enery saving
?In an ideal working state , compared with conventional inject molding machines , their energy saving can reach 20%-80%.
Read More
VAINO INTERNATIONAL LIMITED
HDPE Blow Molding Machine,Extrusion Blow Molding Machine,Automatic Blow Molding Machine
Address: Room1315,B# Ningbo Chamber Of Commerce Building,No.588 Tiantong South Road,Yinzhou District,Ningbo,China,
Ningbo, Zhejiang
China, 315000
Tel: 86-574-88054805
Fax: 86-574-88054565
