Instruments & Meters

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Instruments & Meters

Share us

Eye drop LDPE or HDPE blow molding machine with 4 head or 6 head optional

MP55D-4/6

Send Inquiry

Description

Eye drop LDPE or HDPE blow molding machine with 4 head or 6 head optional

?

?

Brief introduction

This model is especially design for small bottles in HDPE,LDPE material.

4 head production capacity is 45000pcs/day/24hours

6 head production capacity is 60000pcs/day/24hours

defleshing is optional depends on the products design

stable,fast,endurable

?

?

Adopt carriage linear moving system (tie-bar less)and automatic center lubrication system. easy to operation and stable in working. multi head, two layer die head is optional. it is suitable to produce the bottle in food packing, pharmacy and cosmetics area below 2L

?

- - - -
Technical Parameters |
Specifications | 　 | MP55 |
Material | 　 | PE,PP,(PVC,PA)OPTION |
Max container capacity | L | 2 |
Number of die | set | 1,2,3,4 |
Machine Dimension(L×W×H) | M | 2.87×2.14×2.28 |
Total? weight | ton | 3.4 |
Clamping force | kn | 30 |
Platen opening stroks | mm | 120-350 |
Stroke of mould board | 　 | 230 |
Max mould size(W×H) | mm | 340×360 |
Mould thinkness | mm | 125-200 |
Screw diameter | mm | 55 |
Screw L/D ratio | L/D | 25 |
Plasticising capacity | kg/h | 45 |
Number of heating zone | zone | 3 |
Extruder heating power | kw | 13.35 |
Power of screw-bar machine | kw | 0.18 |
Extruder driving power | kw | 11 |
Number of heating zone | zone | 2 |
Power of die heating | kw | 4.2 |
Max die-pin diameter | mm | 75 |
General power of machine | kw | 34.2 |
Power of the electric motor of oil pump | kw | 5.5 |
Air pressure | Mpa | 0.6-0.8 |
Average energy consumption | kw | 23.9 |
Using quantity of compression air | m3/min | 0.8-1 |
Using quantity of cooling water | m3/min | 1.5-2 |
- - - -

?

- - - -
STANDARD CONFIGURATION(EXPORT) |
control sytem |
computer(PLC&touchable screen) | TECHMATION | TAIWAN |
rely | LG | KOREA |
Linear transducer | Novetechinic | GERMANY |
stroke switch | SCHNERIDER | GERMANY |
extrusion parts |
screw and barrel | JINXING | CHINA |
gear box | JIANGWEI | CHINA |
inverter | DELTA | TAIWAN |
pneumatic system |
press adjustment valve | AIRTAC | TAIWAN |
cylinder | AIRTAC | TAIWAN |
throttle valve | AIRTAC | TAIWAN |
pneumatic valve | REXROTH | GERMANY |
hydraulic system |
oil pump | VICKERS | U.S.A |
hydraulic valve | VICKERS | U.S.A |
proportional valve | HNC | TAIWAN |
seal ring | NOK | JAPAN |
Lubrication | Automatic |
- - - -

?

?

- - - -
OPTIONAL FUNCTION |
COLD CUTTER |
DEFLESHING SYSTEM(MACHINE SYSTEM+STEEL BACK PLATEN AND PNEUATIC CYLINDER) |
HYDRAULIC DEFLESHING SYSTEM |
BOTTLE ROTATION TOP CUT OFFLINE |
BLADE NECK ROTATION CUTTING ONLINE INSTALLED/OFF LINE SEPARATE |
HYDRAULIC FILTER |
MECHANICAL FILTER |
LEAK TEST MC ON/OFF LINE |
ROBOT TAKE OUT |
IML(IN MOULD LABELING SYSTEM) |
2 YEAR SPARE PARTS WARRANTY |
SCRAP MATERIAL CONVENYOR |
BOTTLE CONVENYOR AROUND THE MACHINE? OR CUSTOM DESIGN |
POST COOLING SYSTEM |
SIDE WATER REGUAR 12IN-12OUT WITH FLOW CONTROL |
PARISON CONTROL SYSTEM MOOG 100PTS |
SPECIAL SCREW AND BARREL FOR SPECIAL MATERIAL |
SPECIAL PROGRA FOR SPECIAL PRODUCTS AND MOULD DESIGN |
LOADING DEVICE,MASTER BATH MIXING DEVICE |
- - - -

?

Read More