Building Supplies

1. Home
2. Products
3. Construction & Decoration
4. Building Supplies

Share us

Pultruded Fiberglass Shapes

11

Send Inquiry

Description

Pultruded Fiberglass Shapes
Cable tray?is assembled by pultruded?GRP/FRP profiles;?suitable for electrical cable, control cables, lightening cable and fittings. There are fiberglass pipe, fiberglass tank, fiberglass tube and vessel.
Advantage:?
1.Long service life ( normal design life is 20 years)
2.Convenient installation, and low cost (1/4 SG of carbon steel, no need of fire during construction; length per piece can be 8 m, or more.)
3.Easy to cut, no need of maintenance
Application:?
KQJ series cable tray is suitable for voltage below 10 kV electrical cables, control cable, and lightening fitting cables of below 10 kV and the lay out for indoor, outdoor, aerial, channel for cable and tunnel.
Structural features:?
KQJ serial cable trays have the features that: widely used, high strength, reasonable structure, low cost, easy for construction, flexible fittings, nice-looking appearance, which make expansion, rebuilding, maintenance much easier.
Installation:
The installation of KQJ series cable tray can be per the local conditions can be laid according to the process requirements, such as plumbing, floor, hoisting under the beam, indoor and outdoor wall, tunnel, cable trench side wall mounted, but also on the open column.
When height of groove of cable tray is 50,100 mm, 6 connection holes for each end; when height of groove of cable tray is 150,200 mm, 12 connection holes for each end.
Support Spacing: it shall be less than or equal load curve, allowable load and support span.
Width: when we are electing the width of cable tray, we should leave enough spare space for new cables in the future.

Read More