Pumps & Vacuum Equipment

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Pumps & Vacuum Equipment

Share us

Submersible Slurry Pump

Submersible Slurry Pump

Send Inquiry

Description

Product Structure That
ZJQ submersible slurry pump is my company design, research and development of new type pump, the pump is composed of two parts of the motor and pump, the two separated by oil isolation rooms and mechanical seal components, electromechanical integration products, share the same motor and pump shaft (the rotor) the whole pump length is short, compact structure. Equipped with a variety of protection device, the pump running safety and reliability.
Adopt international motor, Y series F class insulation, safe and reliable operation.
With double tandem seal, selecting new alloy material, with a reliable sealing, wear-resisting, long service life, etc.
Use high chromium slag pulp pump flow components, material, wear-resisting performance is good, the flow performance, is the domestic life of the same type pump 2 to 10 times.
Pump Use Method And Matters Needing Attention
1, check the cable for damage, carefully before trial the fastener is loose or fall off, pump in the process of transport, storage, installation with and without deformation or damage.
2, with 500 v megohmmeter measuring insulation resistance between the same electric pump motor and relatively, the value shall be not less than 2 ohms, or dry processing should be made for motor stator winding, the temperature of the drying process are not allowed to exceed 120 ? C.
After 3, pump through the rotation of the direction from the inlet rotate counterclockwise (6), if the electric pump reversal, just put the cable in any second thread for connection location.

Read More