Electrical Product Agents

Share us

6x4 / 7x5 Galvanised Single Axle Trailer With Checker Plate Rolled Body

7X5

Description

?6x4 / 7x5 Galvanised Single Axle Trailer With Checker Plate Rolled Body


Description:

Brand New Heavy Duty Painted Single Axle Box Trailer, 350mm high side, 2.1mm checker plate trailer
Rolled C/Plate floor and body 350mm High Side
2.1mm C/Plate Mudguards
2.1mm Checker Plate front and rear drop down tailgates
Tie rails on Tailgates
Full Leigh Tie Rails on Sides
Light guard protectors
Swing handles to secure gates
Spare Wheel Holder on Draw Bar
50mm lockable plunger coupling
Mud flaps to comply with Australian standards
Plug holder welded to the draw bar
Gross weight 750kg


Specifications:

- - - -
BODY/FLOOR | 350MM Sides 2 piece 2.1mm Rolled Checker Plate Tub |
TAILGATES | 2.1mm Rolled Checker Plate, with 14mm solid tie rails |
MUDGARD | 2.1mm Checker Plate, 250mm Wide 4 Fold |
SIDE TIE RAILS | 27x2mm Pipe Round Full Length |
COUPLING | 50mm Lockable Plunger |
SUSPENSION | Slipper Springs |
AXLES | Solid Axle 39mm Round |
HUBS/FORD | LM A-type PCD 114.3, 5 x 1/2& quot; Studs (Stud Centre 66.6mm) |
BEARINGS | Bearing A-type Inner Large LM67048 Outer Small LM11949 |
RIMS | NEW Sunraysia Type 14x5.5& quot; CB 84mm PCD 114.3 (FORD) |
TYRES | NEW 185R14C |
CHASSIS | ALL40x40 RHS |
DRAW BAR | 70x50 RHS V-type, with spare wheel holder |
SAFETY CHAIN | 8mm Rated chain 450mm Long |
LIGHTS | LED Multi volt 12-24v, Side Clearance Lights 5ft only 7-Pin plug |
- - - -

?

?
?
STANDARD FEATURES
?

?50 mm Lockable coupling

?5 Leaf slipper springs

?Heavy duty angle iron around top & bottom edges of sides & tailboards for added strength

?Swivel jockey wheel mounted to draw bar

?Spare wheel mounted to draw bar – lockable

?Built in rubber mud flaps rear of mudguards

?Swing handles to secure the tailgates

?V- type draw bar made from square RHS tube

?Spare wheel holder on draw bar

?Lockable plunger coupling

?LED ADR approved lights (Protected) front and side reflectors

?Mud flaps to comply with Australian standards

?New wheels (NOTE: NOT SECOND HAND)

?Plug holder welded to the draw bar
?
?
Advantage:
?
This is a well built Australian made trailer with fully rolled checker plate body with 350mm high sides, undercoated and top coated in many color& acute;s with fully seal mudguards and side rails.

cheap prodocuts, china suppliers,

Read More

Previous

Single Axle 7x4 Galvanized Utility Trailer Heavy Duty , Galvanised Tipping Trailer...

Previous

7x5 / 8x5 Modern Galvanised Single Axle Trailer With Checker Plate Rolled Body...

Changzhou Hongle Machinery Co.,Ltd

Galvanized Tandem Trailer,Galvanised Single Axle Trailer,Galvanized Cage Trailer

Address: No.2650 Longcheng Road,New Area, Changzhou 213022,
Changzhou, Jiangsu
China, 213000

Tel: 86-519-85518918
Fax: 86-0519-85518508

H5响应式定制设计
26种语言,SEO营销型网站


H5/响应式/营销型企业网站; 26种语言扩展;
覆盖: 英文、法语、德语、西班牙语、葡萄牙语、俄语、阿拉伯语、波斯语、日语、韩语
了解更多