Optoelectronic Displays
Description
Quick?Detail:
?
SPI?laser?marking?card?can?be?used?to?control?the?SPI?G4.0?laser?machine?to?marking,engraving,cutting?on?
surface?of?material.Software?EZCAD?Support?SPI?laser?type.?
?
Description:
# 68-pins?SCSI?3socket?is?used?on?the?board?to?connect?SPI?G3?laser?module?directly?.
# Support?SPI?laser?type.
# 8 routes general output signal .(TTL compatible).out 4/5/6/7 can be changed to open-drain mode by jumper to drive small power relay directly .
# 13?routes?of?input(TTL?compliant)?.In0,?In4-In13,?XORG0(IN14),?YORG0(IN15)?.
# Compatible?with?USB2.0?specifications.
# Mark-on-fly:?encoder?can?be?connected?to?the?board?to?measure?the?fly?speed?.?
# Remark function: this function is used to remark what ever is in the memory of the board,especially convenient for high speed marking of a same pattern.
# Power?supply:+-5V/3A??
# Dimensions:?167mm*125.5mm*23
?
Applicable?scope:
# Laser?Marking
# Laser?Engraving
# Drilling?circuit?board?with?holes
# Cutting?cloth
# Cutting?paper
# Laser?marking?on?metal
# Wave?Optional:0-39
Function:
# Fly?marking?
# Ruler?mark
# 4?kinds?of?Hatch
# Two?axis?control
# Multi-head?
# Vision?mark
?
Specifications:
?
?
- - - -
FEATURE |
Output?digital?signals?for?digital?scan?head. |
Mark-on-fly:encoder?can?be?connected?to?the?board?to?measure?the?fly?speed?. |
Multiple?boards?on?1?computer:?One?computer?can?control?up?to?8?control?board?to?mark?different pattern?simultaneously |
Extend?axis?output:Two?Direction/pulse?signals,used?to?control?stepping?motor?or?servomotor?for?rotary marking?and?split?marking. |
13?routes?of?input(TTL?compliant)?.In0,?In4-In13,?XORG0(IN14),?YORG0(IN15)?. |
8?routes?of?output(TTL?compliant)?.Out0-7?output?from?CON5?,and?out4-7?could?be?OC. |
USB2.0?Compatible |
- - - -
?
?
- - - -
CARD?PARAMETER |
Electrical?Parameter |
Power?supply?parameters:?DC5V/3A |
Connector:?USB?connector/DB?connector |
Signal:?8?routes?general?digital?signal.(TTL?compatible) |
- - - -
?
?
- - - -
Precautions |
Protect?the?board?from?humidity,?dust,?corrosive?vapors?and?mechanical?stress. |
Carefully?check?your?application?program?before?running?it.?Programming?errors?can?cause?a?break? down?of?the?system.?In?this?case?neither?the?laser?nor?the?scan?head?can?be?controlled. |
For?storage?and?operation,?avoid?electromagnetic?fields?and?static?electricity.? These?can?damage?the?electronics?on?the?product.?For?storage,?always?use?the?anti-static?bag. |
The?allowed?operating?temperature?range?is?25℃?±?10℃. |
The?storage?temperature?should?be?between?–20℃?and?+60℃. |
- - - -
?
?
- - - -
ACCESSORIES |
DB9?male/female?sockets | USB?cable?(1.5m) |
DB15?male/female?sockets | CD |
- - - -
?
?
Competitive?Advantage:
?
Work?stable,operation?simple,easy?to?learn,famous?software?EZCAD,low?cost,USB?connection.
?
Read More
Beijing JCZ Technology Co. Ltd
EZCAD Laser Marking Software,Laser Engraving Software,3D Laser Engraving System
Address: M3 building, No1 East Road of Jiuxianqiao, Chaoyang district, Beijing China,
Beijing, Beijing
China, 100000
Tel: 86-010-64426995
Fax: 86-010-64426995
