Chemicals Stocks
Description
Marble Waterproof Glue Mosaic Tile Adhesive , Grassing Stone Ultra Tile Adhesive
?
?
The product is a new type strong adhesive, applied to indoor and outdoor wall paste of large-scale ceramic tile, grassing stone, natural stone material, modifies epoxy glue with features of strong adhesive strength, low stress, low dilatability, no bubble, quick set, proper viscosity and easy operate, resistant of grind, aging, cold-hot exchange.
?
?
Features: ?
????
1, A new type strong adhesive, applied to indoor and outdoor wall paste of large-sized ceramic tile, grassing stone and natural stone material.
?
2, Light steel frame system board, like indoor paste ceramic tile gypsum board and Eterpan.?
?
3, Can be used on the low water-absorption surface, like pasting new ceramic tile above the old ones, and can be used on the firm painting surface.
?
4, Excellent flexibility, can bear the stretch of the bonding layer that caused by temperature difference.
?
5, Good anti-infiltration function.
?
6, No need to wet the brick wall, effectively improve the efficiency.
?
?
Surface Treatment:
?
1, The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials.
?
2, For the new wall, when leveling the cement mortar, should improve the mortar mark to strengthen the bonding power between the leveling layer and the wall, or mix PB-03 cement mortar additive.Specific information please refer to the PB-03 introduction.?
?
?
Operation Process:
?
1, Using tooth scraper to scrap the adhesive onto the surface evenly, control within 1㎡.
?
2, Push the ceramic tile or heavy type ceramic tile above it directly.
?
3, For the tile or stone material with deep ditch, not only scrape the surface, but also the backside of the tile or stone.
?
?
Cautions:
?
1, Never mix the dry slurry with water for second use.
?
2, For the light wall pasting large-sized decorative boards, like gypsum board and Eterpan, confirming the wall firmness before operation.????
?
3, For the painting surface, make sure the initial bond strength and have no cavitation.
?
4, Operating in the situation under 5℃~40℃.
?
5, Clean the surface by slightly wet sponge or cloth before it dried.
?
6, Leave 1.5mm joint space between two tiles, suggesting PB-MC color anti-moldy gap filler.
?
?
Technical Reference:
?
- - - -
Coverage area(amount) | Technical reference |
1, using 3×3mm tooth scraper about 1.7kg/㎡ | 1, adjust time: about 15min (adjust time: the ? effective time for the dislocation to adjust) |
2,using 6×6mm tooth scraper about 3.0kg/㎡ | 2, cool time: about 10min (cool time: the ? longest cool time that the adhesive can last ) |
3, using 10×10mm tooth scraper about 4.5kg/㎡ | 3, dry time: 24h (according to the weather) |
4, water resistance: excellent; non-toxic, ??prevent fire |
the smoother the surface, the less amount. | 5, when dry, anti-weak acid, anti-strong alkali ? and oil resistance |
6, cut degree: ＞1.2MPa (14days later) |
- - - -
?
?
Store Method:
?
Store in cool and dry place, unopened product can be saved for one year.
?
?
Packing:
?
20kg/bag
Read More
Guangzhou Pinbang Building lndustrial company limited
Ceramic Wall Tile Adhesive(21),Ceramic Floor Tile Adhesive(12),Marble Tile Adhesive(15)
Address: Room A601, Yangcheng Garden, Zhongshan Avenue,
tianhe, guangzhou
China, 510000
Tel: 86-020-32026839
Fax: 86-020-32026839
