Assembly Line & Production Line
Description
1000mm length coil Semi-automatic guiltar coil winding machine Winding Machine
Specifications:
- - - -
indle head | 1 |
Spindle speed | 0--1600 RPM |
Turning diameter | 0—220mm |
Winding Width | 0--1800mm |
Applicable wire diameter | 0.03-1.5mm |
Working voltage | 220V/50HZ |
Spindle motor | 500W+1HP |
Total Power | 900W |
Machine size | 1700*350*480mm |
Machine weight | 220kg |
- - - -
?
?
?
Description:
1, the machine uses channel rack, roll test one, compact structure, smooth operation, small footprint. It has a high applicability and appearance.
2, the use of variable speed motors, speed table speed can be within a certain range governor free, easy to operate. With a computer-controlled Comptroller, Comptroller value can be read at any time, to facilitate on-site management.
3, infrared photoelectric trimming control, hydraulic correction system, so that trimming error <10mm.
4, the machine edge roll-mortem, according to customer needs can also be configured width of the shearing device. In order to get the desired width of the material. Large package can be configured (diameter 800mm) back rack solution.
?
?
?
?
Applications:
It applies to finished materials testing, retractors, also applies to the composite material of the retractor. According to customer needs can also be configured width of the shearing device. In order to get the desired width of the material.
the use of variable speed motors, speed table speed can be within a certain range governor free, easy to operate. With a computer-controlled Comptroller, Comptroller value can be read at any time, to facilitate on-site management.
?
?
?
Competitive Advantage:
1. 32-bit ARM control chip, faster operation, effectively reduce the discharge line errors.
2. winding to the both end intelligent deceleration, winding fast the same time also big power winding
3. Full ENGLSIH TOUCH SCREEN CONTROLLER COMPUTER, the operation more convenient.
4. All input and output optical isolation, stable.
5. power off saving data, power off automatically shut down, avoid scrap coils.
6. use the computer automatic measure ,Intelligent input start winding point and row width.
7. You can set the time of climb spindle, real lifting spindle speed, speed tracking.
8. Japan imported bearings, belts, screw ensure stable performance of Taiwan& acute;s imports.
9. Cast iron housing, strengthening board, moving big power tailstock, and thick wire tension device.
?
Read More
Changzhou Hantian Cable Equipment Factory
Cable Extrusion Machine,Wire Extrusion Machine,Plastic Extrusion Machine
Address: Lijia Town, Qingyang Industry Zone,
Changzhou, Jiangsu
China, 213000
Tel: 86-519-88707557
Fax: 86-519-88707557
