Rubber & Products
Description
Features of Pourable mold Silicone rubber for Shoe Mold Making:
Shoes mould Making RTV-2 Silicone Rubber is a two-component material, and RTV-2 silicone rubber is consisted of Part A silicone base and Part B CA30 curing agent, and the silicone base and curing agent can cure at room temperature by a condensation reaction. These materials can be cast into the cured silicone mould: Shoe mould making, sand casting etc.
Characteristics of Pourable mold Silicone rubber for Shoe Mold Making
1. Good flow ability and long working time
2. Medium hardness stone mold making
3. High tear and tensile strength
4. Easy de-mould from complex replica parts
5. Acid and alkali-resistance
6. Low linear shrinkage
Instructions for Pourable mold Silicone rubber for Shoe Mold Making
1. Make sure the surface of the original is clean and free of loose material.
2. Weight 100 Part A base and 2 parts of CA30 Curing Agent in a clean container.
3. Stir Part A base silicone before use thoroughly, as filler separation may occur upon prolonged storage.
4. Mix Part A and Part B evenly until the CA30 completely dispersed in the base.
5. Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original
6. De-mold after 24 hours, it is will improve the replicate times of silicone mold.
Storage of Pourable mold Silicone rubber for Shoe Mold Making
When the Shoes Mold Making RTV-2 Silicone Rubber is stored at or below 30 ° C (85° F) in the original unopened containers, RTV3020 silicone base and CA30 curing agent have a usable life of 12 months from the date of product
Read More
MINGCHENG GROUP LIMITED
RTV2 silicone rubber, silicone rubber, mold making silicone,Molding silicon rubber, RTV-2 锛宻ilicone, liquid silicone, silicone rubber for molding, silicone material,rtv2 silicone
Address: No.3, Chuang Ye 2nd Rd., He Lu Industrial Zone, Huang Jiang, China ,
Dong Guan, GuangDong
China, 523758
Tel: 0086-18664910895
Fax: 0086-769-89975601
