Auto Electrical System
Description
More than 200 different logo options,custom logo design is acceptable,you can have your own DIY logos!!!
This LED Door Lights can be automaticlly on when car doors open.
Outpower:3W/5W
Voltage:12V/24V
Working Temp:-40 degrees~ 105 degrees
Material:Aluminium alloy casing
Life span:30,000-50,000 hours
Certification:E4 / RDW
Installation:
This LED lights can be installed at the bottom of the door flameand make sure the Len vertical with the ground ;
1. Pull down the inside door board first. Mark the suitablelocation for drilling a hole.
2. Drill the hole on the door board with our borer .
3. Inset the product from the bottom of car door ,then arrange thepower cord.
4. Install the nut through the power cord upon the hole inside;Tighten the nut;
5. Connect the power cord according to the installation guide;
6. Adjust the lamp projection to the suitable place with wrenchtool.
7. Reinstall the inside door board,then check the final effect.
Read More
JIAXING AUTO STUFF CO.,LTD
LED Car 3D Logo Laser Lights, LED Ghost Shadow Lights,Lambo Doors Kit,Bluetooth Handsfree Car Kit, HID Xenon Lights,LED Work Light,JIAXING AUTO STUFF CO.,LTD
Address: 9D Century Square,zhongshan road,
jiaxing , zhejiang
China, 314000
Tel: 0086-130 6752 6608
Fax: 86-400-6891163-12174
