Electronics Production Machinery

1. Home
2. Products
3. Electronic & Electrical
4. Electronics Production Machinery

Share us

Electrical Weatherhead All Aluminium Alloy Conductor 19 Strand Power Transmission Wire

AAAC

Send Inquiry

Description

Electrical Weatherhead All Aluminium Alloy Conductor 19 Strand Power Transmission Wire

Product Description

?

1. Applications

Electrical Weatherhead All Aluminium Alloy Conductor 19 Strand Power Transmission Wire) have been widely used in power transmission lines with various voltage levels,because they have such good characteristics as simple structure,convenient installation and maintenance,low cost large transmission capacity.And they are also suitable for laying across rivers valleys and the places where special geographical features exist.

2. Service Performance

(1). The permissible long-time operating temperature for aerial conductor is 70oC.

(2). Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area,the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.

(3). When connecting conductors,the conductor beside the connecting tube cant be prominent.Otherwise,the force on the operating conductors will be unbalanced.After connectors are install,the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.

(4). Under installaion,the arc downing stress of all the conductors should be the same.With in the permissible distance of crossing buildings or dropping to the ground,the stress can be 10-15% higher than regular stress.

3. Product Performance

(1). The electrical performance of AAC and ACSR is indicated in DCΩ/km(20oC).The resistivity of the hard aluminum wire for stranded wires is not greater than 28.264 nΩ. m of international standard value.

(2). The rated tensile strength of AAC is denoted with the result of total cross-section of all aluminum conductors multiplied by min.tensile of corresponding size specified in the standard for aluminum wire.

(3). The rated tensile strengh of ACSR is denoted with sum of all aluminum conductorstensile strength and steels tensile strength.

a. The tensile strength of all aluminum conductors is denoted with the result of all cross-sections of aluminum conductors multiplied by min.tensile strength of corresponding size specified in the standard for aluminum wire.

b. The tensile strength of all steel wire is denoted with the result of all cross-sections of steel wires multiplied by the stress at 1% elongation of corresponding size specified in the standard for steel wire.

4.? Material Standard

(1). The hard aluminum conductor used for AAC and ACSR conforms to the standard GB/T 17048-1997(equivalent to IEC 60889:1987).

(2). The zinc coated steel wire used for ACSR conforms to IEC 60888:1987.

(3). Production can be arranged according to customers requirements for material standard,etc.

Construction of All Aluminum Conductor and Aluminum Conductor Steel Reinforced

?

ASTM B232(ACSR)

- - - -
Code name | Aluminum Area | Stranding& Wire Diameter | Approx Overall Diameter | Approx Weight | Breaking Load | DC Resistance |
Al | Steel |
AWG | mm2 | No./mm | No./mm | mm | Kg/km | KN | Ohm/km |
Turkey | 6 | 13.30 | 6/1.68 | 1/1.68 | 5.04 | 53.75 | 5303 | 2.157 |
Swan | 4 | 21.18 | 6/2.12 | 1/2.12 | 6.36 | 85.57 | 8302 | 1335 |
Swanate | 4 | 21.12 | 7/1.96 | 1/2.61 | 6.53 | 99.56 | 10642 | 1352 |
Sparrow | 2 | 33.59 | 6/2.67 | 1/2.67 | 8.01 | 135.70 | 12653 | 0.854 |
Raven | 1/0 | 53.52 | 6/3.37 | 1/3.37 | 10.10 | 216.20 | 19455 | 0.536 |
Quail | 2/0 | 67.32 | 6/3.78 | 1/3.78 | 11.30 | 272.00 | 23529 | 0.426 |
Pigeon | 3/0 | 85.14 | 6/4.25 | 1/4.25 | 12.80 | 344.00 | 29417 | 0.337 |
Penguin | 4/0 | 107.20 | 6/4.77 | 1/4.77 | 14.30 | 433.40 | 37055 | 0.268 |
Waxwing | 266800 | 135.00 | 18/3.09 | 1/3.09 | 15.50 | 430.50 | 30519 | 0.213 |
Merlin | 336400 | 170.20 | 18/3.47 | 1/3.47 | 17.40 | 542.90 | 38487 | 0.169 |
Linnet | 336400 | 170.60 | 26/2.89 | 7/2.25 | 18.30 | 689.90 | 62918 | 0.169 |
Hawk | 477000 | 241.6 | 26/3.44 | 7/2.67 | 21.80 | 975.50 | 86011 | 0.120 |
Dove | 556500 | 282.6 | 26/3.72 | 7/2.89 | 23.6 | 1142.00 | 100838 | 0.1030 |
Peacock | 605000 | 306.2 | 24/4.03 | 7/2.69 | 24.2 | 1159.00 | 95861 | 0.0948 |
Drake | 795000 | 402.5 | 26/4.44 | 7/3.45 | 28.1 | 1626.00 | 138669 | 0.0717 |
Rail | 954000 | 483.8 | 45/3.70 | 7/2.47 | 29.6 | 1602.00 | 115626 | 0.0597 |
- - - -

?

- - - -
? | AAAC Technical Characters Based on Standard BS EN50182 |
BS EN50182 |
Code | Old Code | Cross section | No. of wires | Diameter | Mass per unit length | Rated strength | DC resistance at 20 |
Wire | Conductor |
mm2 | ? | mm | mm | kg/km | KN | ??/km |
19-Al3 | BOX | 18.8 | 7 | 1.85 | 5.55 | 51.4 | 5.55 | 1.7480 |
24-Al3 | ACACIA | 23.8 | 7 | 2.08 | 6.24 | 64.9 | 7.02 | 1.3828 |
30-Al3 | ALMOND | 30.1 | 7 | 2.34 | 7.02 | 82.2 | 8.88 | 1.0926 |
35-Al3 | CEDAR | 35.5 | 7 | 2.54 | 7.62 | 96.8 | 10.46 | 0.9273 |
42-Al3 | DEODAR | 42.2 | 7 | 2.77 | 8.31 | 115.2 | 12.44 | 0.7797 |
48-Al3 | FIR | 47.8 | 7 | 2.95 | 8.85 | 130.6 | 14.11 | 0.6875 |
60-Al3 | HAZEL | 59.9 | 7 | 3.30 | 9.90 | 163.4 | 17.66 | 0.5494 |
72-Al3 | PINE | 71.6 | 7 | 3.61 | 10.80 | 195.6 | 21.14 | 0.4591 |
84-Al3 | HOLLY | 84.1 | 7 | 3.91 | 11.70 | 229.5 | 24.79 | 0.3913 |
90-Al3 | WILLOW | 89.7 | 7 | 4.04 | 12.10 | 245.0 | 26.47 | 0.3665 |
119-Al3 | OAK | 118.9 | 7 | 4.65 | 14.00 | 324.5 | 35.07 | 0.2767 |
151-Al3 | MULBERRY | 150.9 | 19 | 3.18 | 15.90 | 414.3 | 44.52 | 0.2192 |
181-Al3 | ASH | 180.7 | 19 | 3.48 | 17.40 | 496.1 | 53.31 | 0.1830 |
211-Al3 | ELM | 211.0 | 19 | 3.76 | 18.80 | 579.2 | 62.24 | 0.1568 |
239-Al3 | POPLAR | 239.4 | 37 | 2.87 | 20.10 | 659.4 | 70.61 | 0.1387 |
303-Al3 | SYCAMORE | 303.2 | 37 | 3.23 | 22.60 | 835.2 | 89.40 | 0.1095 |
362-Al3 | UPAS | 362.1 | 37 | 3.53 | 24.70 | 997.5 | 106.82 | 0.0917 |
479-Al3 | YEW | 479.0 | 37 | 4.06 | 28.40 | 1319.6 | 141.31 | 0.0693 |
498-Al3 | TOTARA | 498.1 | 37 | 4.14 | 29.00 | 1372.1 | 146.93 | 0.0666 |
587-Al3 | RUBUS | 586.9 | 61 | 3.50 | 31.50 | 1622.0 | 173.13 | 0.0567 |
659-Al3 | SORBUS | 659.4 | 61 | 3.71 | 33.40 | 1822.5 | 194.53 | 0.0505 |
821-Al3 | ARAUCARIA | 821.1 | 61 | 4.14 | 37.30 | 2269.4 | 242.24 | 0.0406 |
996-Al3 | REDWOOD | 996.2 | 61 | 4.56 | 41.00 | 2753.2 | 293.88 | 0 |
- - - -

Packaging & Shipping

?

Export wooden drum, steel-wooden drum as customer& acute;s requests

Delivery time: Within 20days after deposit

Our?Services

?

1, experienced QC to control the quality of different kind of cables.
2, CCC certificated, and can provide CE, Rohs and SGS certificates before exporting.
3, Huge Inventory Allows Us To Ship Your Order Immediately
4, We are all capable and professinal. And offer you the Prompt Courteous Service.

?

Company Information

?

Jinshui Wire & Cable Group is located in the national class Zhengzhou high and new technology industries development zone in Zhengzhou, which is full of famous enterprises with a graceful and elegant environment. With abundant human resources, expedite transportation network, widespread scientific research institutions, sophisticated technical support and superior geographic location which is richly endowed by nature.

Jinshui Wire & Cable Group is also a key company of high and new technology industry on state level in China. With strong capabilities of R&D and innovation Jinshui Wire & Cable Group has owned a number of exclusive essential manufacture technologies and has passed the certification of ISO 9001 Quality Management System, ISO 14001 Environmental Management System, OHSAS18001 Occupational Heath Management System, ISO10012 Measurement Management System and others from China and abroad.

?



?

?

FAQ

?

?

Q: How can I know more information about the product I need? How can I place the order?

A:?You can click & quot;Contact Supplier& quot; to send message to me.

?

Q: What information should I let you know if I want to get a quotation?

A: Sizes, Quantity, Payment and Shipping Terms, Packing method, etc.

?

Read More